Siemens Hicom 150 E Office - MSN Trunk Forwarding (Only in a Multi-Device Connection with Release 2.2 or Later, Not for the U.S.)

34
Deactivating call forwarding
MSN Trunk Forwarding (Only in a Multi-Device
Connection with Release 2.2 or Later, Not for the
U.S.)
Activating
Deactivating
Lift the handset.
(If call forwarding is already activated,
you hear a special dial tone.)
Enter the code # 1.
1
Lift the handset.
If call forwarding has already been activated,
a special dial tone sounds.
Enter the code
*
64.
Enter the forwarding method (1=immediate,
2=on no answer, 3=on busy),
Enter your own MSN.
Enter the destination number without the ex-
ternal code.
6 4
Lift the handset.
When call forwarding is deactivated,
a special dial tone sounds.
Enter the code #64.
Enter the forwarding method (1=immediate,
2=on no answer, 3=on busy),
Enter your own MSN.
6 4