Need help?Do you have a question about the Siemens SIMATIC CN 4100 and is the answer not in the manual?
General| Power supply | 100-240 V AC, 50/60 Hz |
|---|---|
| Protection Class | IP20 |
| Control | Ethernet |
| Interface | RJ45, RS-232 |
| Operating Temperature | +40 °C |
| Relative Humidity | 90 %, non-condensing |
| Audio outputs | 2 x XLR (balanced) |
Details on where the SIMATIC CN 4100 system can be used and its adaptability.
Definition and basic design of the SIMATIC CN 4100 communication system.
Explains interfaces, topology, and configuration options for the SIMATIC CN 4100.
General notes on mounting, environmental conditions, and package contents.
Details on identifying product information from the nameplate.
Covers clearances, drill hole dimensions, and protective grounding for mounting.
Important operational rules, safety precautions, and emergency stop usage.
Details on typical functional extra-low voltage and isolation requirements.
Information on cable cross-sections, protection against electrical influences, and wiring.
Describes the commissioning procedure, phases, and LED status indicators.
Instructions on using the CPU module's reset button for power, restart, and shutdown.
Explanation of status LEDs on the CPU module for operating modes and errors.
Step-by-step guide for safely replacing modules in the SIMATIC CN 4100 system.
Information on certifications like CE, UL, UKCA, and compliance standards.
Detailed technical data for CPU modules and the rack, including dimensions and interfaces.
Visual representation and measurements of the SIMATIC CN 4100 rack.
Details on USB 3.0 and Ethernet ports available on the rack.
Information on Micro-HDMI and Micro-USB ports on the CPU module.
General introduction to the services and support offered by Siemens.
Conditions and information regarding the product warranty.
How to access online resources and technical assistance for the system.
To Next Page