To Next PageTo Next Page
Need help?Do you have a question about the Siemens CP 1243-1 and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | CP 1243-1 |
| Category | Conference System |
| Language | English |
Details the scope and applicability of the manual for the telecontrol product.
Defines abbreviations and short forms used for product names and configuration tools.
Outlines the manual's objectives: describing module properties and supporting installation.
Summarizes new features and revisions included in the current manual version.
Provides a link to find the latest version of the manual on Siemens Industry Online Support.
Lists the necessary expertise for installing, commissioning, and operating the CP.
Informs about open source software and directs users to license conditions documentation.
Discusses Siemens' industrial security concept and recommendations for secure operation.
Guides users to find explanations for specialist terms used in SIMATIC NET documentation.
Provides information on environmentally friendly recycling and disposal of the product.
Describes the CP's intended use in S7-1200 systems and its connection capabilities.
Details supported communication services like telecontrol, messages, and S7/PG/OP communication.
Covers data point configuration, IP configuration (IPv4/IPv6), time synchronization, and event storage.
Explains Industrial Ethernet Security features, data protection measures, and online functions.
Specifies limits for CMs/CPs per station, connection resources, and data point configuration.
Illustrates practical configuration scenarios for sending emails and telecontrol communication.
Details hardware and software requirements for configuring and operating the CP.
Instructs on how to open the module housing to access display elements and connectors.
Explains the function and meaning of the module's status LEDs for basic and detailed information.
Describes the power supply and Ethernet interface (RJ-45) of the CP module.
Covers safety notices, overvoltage protection, and guidelines for hazardous area usage.
Provides procedures for module installation, connection, and initial commissioning steps.
Offers operational guidelines, including requirements for commissioning and front panel closure.
Details general, physical access, and network attachment security measures for system protection.
Guides on configuring modules and networks within SIMATIC STEP 7 for telecontrol communication.
Explains IP addressing and authentication data required for TeleControl Basic and DNP3/IEC communication.
Covers methods for synchronizing the CP's time, including NTP and time from partner/CPU.
Details how to enable various communication types like telecontrol, DNP3, and IEC protocols.
Covers CP identification, time synchronization, advanced options, and transmission settings.
Explains SNMP support, including SNMPv1 and SNMPv3, and community string configuration.
Details configuration of partner stations for DNP3, IEC, and TeleControl Basic protocols.
Covers parameter overview, CP identification, DNP3 security, firewall, VPN, and user management.
Guides on data point configuration, types, indexing, status IDs, and transmission modes.
Explains how to configure and send e-mails based on events, including trigger conditions.
Describes how to access the CPU's Web server for information and management via the CP.
Details program blocks for Open User Communication (OUC) like TSEND, TRCV, and TMAIL.
Explains how to programmatically change the CP's IP parameters like address and subnet mask.
Covers LED status, STEP 7 diagnostics tabs, online functions, and industrial remote communication.
Provides steps for performing security diagnostics without opening port 102.
Explains how to use online functions and TeleService for diagnostics and maintenance via LAN/WAN.
Details SNMP support, including versions, MIB objects, and range of performance as an SNMP agent.
Explains how to interpret e-mail processing status codes and troubleshoot delivery issues.
Guides on obtaining and downloading new firmware versions for the CP via Web server or STEP 7.
Describes the procedure for replacing a CP module, emphasizing data safety via CPU storage.
Lists detailed technical specifications including article number, Ethernet properties, and electrical data.
Shows the RJ-45 pin assignment for the Ethernet interface, corresponding to IEEE 802.3 standard.
Lists issued approvals and EC declaration of conformity, including links to relevant documents.
Details IECEx classification and standards met for explosion protection in hazardous areas.
Covers ATEX approval, type examination certificate, and relevant standards for explosive atmospheres.
Lists UL and CSA applied standards and conditions for use in hazardous locations.
Presents FM approval standards and equipment ratings for hazardous area classifications.
States compliance with AS/NZS 2064 standards for the Australian market.
Confirms compliance with technical regulations of the Eurasian Customs Union.
Informs about regular submission of SIMATIC NET products for market-specific approvals.
Specifies that all dimensions presented in the drawings are in millimeters.
Guides on locating product catalogs, manuals online, and documentation on data media.
