Siemens CP 1243-1 User Manual

CP 1243-1
Operating Instructions, 04/2017, C79000-G8976-C365-03
121
Diagnostics and upkeep
6
6.1
Diagnostics options
The following diagnostics options are available.
LEDs of the module
For information on the LED displays, refer to the section LEDs (Page 26).
STEP 7: The "Diagnostics" tab in the Inspector window
Here, you can obtain the following information about the online status of the selected
module.
STEP 7: Diagnostics functions in the "Online > Online and diagnostics" menu
Using the online functions, you can read diagnostics information from the CP from an
engineering station on which the project with the CP is stored.
If you want to operate online diagnostics with the station via the CP, you need to activate the
online functions in the parameter group "Communication types" see the section
Communication types (Page 45).
"Diagnostics" group
Here, you can obtain the following static information on the selected module:
● General information on the module
General information on the module
● Diagnostics status
Information on the diagnostics status
● Ethernet interface
Address and statistical information

Siemens CP 1243-1 Specifications

General

Brand	Siemens
Model	CP 1243-1
Category	Conference System
Language	English