To Next PageTo Next Page
Need help?Do you have a question about the Siemens RF180C and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | RF180C |
| Category | Conference System |
| Language | English |
Outlines the manual's objective, required knowledge, and scope of coverage for the RF180C.
Positions the manual within the overall documentation and provides recycling/disposal information.
Defines the product's application area and provides a general overview of the RF180C module.
Details the key features and additional capabilities of the RF180C communication module.
Describes the physical design of the RF180C and its connection block options (M12 and Push-Pull).
Explains electrical potential relationships and how the RF180C integrates into automation systems.
Details physical mounting locations and required space for the RF180C module.
Instructions for physically attaching the RF180C I/O module to a stable surface.
Procedure for attaching the PROFINET IO and power supply connection block to the base unit.
Guide on how to replace identification labels on the RF180C module and connection blocks.
Step-by-step procedure for safely removing the RF180C communication module.
Covers proper usage guidelines, PROFINET IO system connection, and safety warnings.
Explains PROFINET IO communication setup using BUS or STAR topologies.
Step-by-step guide and requirements for connecting the RF180C via the M12 interface.
Instructions and requirements for wiring the RF180C using the push-pull connection block.
Explains how to daisy-chain PROFINET IO and supply voltage through multiple RF180C modules.
Covers connecting via RJ45 and establishing functional ground (PE) for the RF180C.
Guide for configuring the RF180C within a PROFINET IO network using STEP 7 or TIA Portal.
Explains how to assign unique device names to the RF180C for PROFINET IO addressing.
Details the RFID-relevant parameters that can be configured for the RF180C.
Details the input parameters for RF180C when using function blocks FB 45 and FB 55.
Lists available commands for RF180C with standard addressing (FB 45/55) and RFID standard profile.
Step-by-step instructions for replacing the RF180C communication module with a new one.
Guidance on resolving issues if the RF180C fails to start up after replacement.
Procedure for updating the firmware of the RF180C communication module via PROFINET.
Instructions for resetting the RF180C module to its original factory default settings.
Explains how to interpret the status of the RF180C using its onboard LEDs.
Covers how to configure diagnostic alarms and error reporting for the RF180C.
Details the format and content of the diagnostic data records for the RF180C.
Technical details for Ethernet and serial interfaces, readers, programming, and commands.
Technical specifications for supply voltage, current consumption, and infeed currents.
Physical dimensions, mounting position, weight, and degree of protection for the RF180C.
Operating and storage temperature ranges, vibration, shock resistance, MTBF, and approvals.
Dimension drawing showing the RF180C with the M12 bus connection block and fixing holes.
Dimension drawing showing the RF180C with the push-pull bus connection block and fixing holes.
Information on available standard cables and their routing for connecting readers to the RF180C.
Details on maximum cable length and pin assignments for M12 reader and extension cables.
Pin assignment for M12 to Sub-D 9-pin cables and important notes for D-sub readers.
Guide for users assembling their own reader/SLG cables, including cable structure and connectors.
Lists order numbers for the RF180C module, connection blocks, and M12 accessories.
Provides order numbers for push-pull accessories and various RFID reader cables.
Contact details for technical support, including phone, fax, and email.
Information on support services, newsletters, documentation, and RFID homepage.
Links to online technical documentation, catalogs, ordering systems, and training information.
