Siemens SIMATIC CN 4100 - Nameplate Information

5.3 Information on the nameplate
De󹪝nition
The nameplate is attached to the product by the manufacturer to classify and describe the
product.
Note
Only the information printed on the nameplate of the respective component is valid.
Approvals and certi󹪝cations (Page 59)
The approvals and certi󹪝cations shown below are examples only.
This section describes the information on the nameplates of the SIMATIC CN 4100
communication system components.
Design of the nameplate
The identi󹪝cation data on the nameplate is more extensive depending on the component.
Example of a nameplate of the CPU module:









① Company
② Trademark
③ Module type
④ Country of manufacture
⑤ Approvals and certi󹪝cations
⑥ Serial number
⑦ Manufacturer address
Installation
5.3 Information on the nameplate
CN 4100 Communication System
22 Equipment Manual, 10/2021, A5E50871363-AA