Siemens SIMATIC CN 4100 User Manual

10.2 Technical speci󹪝cations of components
10.2.1 Technical speci󹪝cations - CPU module
Technical speci󹪝cations TED
Article number 6DL4178-0BH01-0XX0
General information
Product type designation CPU modules 1 slot
HW functional status FS02
Firmware version V1.0
Engineering with
• PCS 7 con󹪝gurable/integrated from version
V9.0 SP3
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
Current consumption, max. 400 mA; without USB power supply
Power loss
Power loss, typ. 10 W
Memory
Type of memory Flash
Work memory
• integrated
2 Gbyte; ECC
• expandable
No
Backup
• present
Yes; Entire project maintenance-free in the integral
EEPROM
FB
• Number, max.
16 000
Hardware con󹪝guration
Slots
• required slots
1
Interfaces
Number of industrial Ethernet interfaces 3
Protocols
Supports protocol for PROFINET IO No
EtherNet/IP No
Modbus TCP Yes
S7 protocol Yes
OPC UA Yes
OPC UA
Technical speci󹪝cations
10.2 Technical speci󹪝cations of components
CN 4100 Communication System
Equipment Manual, 10/2021, A5E50871363-AA 63

Siemens SIMATIC CN 4100 Specifications

General

Brand	Siemens
Model	SIMATIC CN 4100
Category	Conference System
Language	English