Siemens SIMATIC CN 4100 User Manual

General industry standards
The SIMATIC CN 4100 communication system is designed to meet or exceed most general
industry standards. These are in particular:
• Power input on shielded and unshielded signal lines:
IEC 61000-4-6 (Ed. 4.0 2013-10 + corr. 1:2015); EN 61000-4-6 (2014-02); DIN EN 61000-4-6
(2014-08)
• Immunity testing, high frequency electromagnetic 󹪝eld:
IEC 61000-4-3 (2008-04+A2:2010-03); EN 61000-4-3
(2006-05+A1:2008-02+A2:2010-07); DIN EN 61000-4-3 (2011-04).
• Measurement of conducted emissions on telecommunication lines: 150 kHz - 30 MHz:
EN 55016-2-1:2009-03+A1:2011-04+A2:2013-05 (CISPR 16-2-1).
• Burst – Immunity of shielded signal lines:
IEC 61000-4-4 (2012-04); EN 61000-4-4 (2012-11); DIN EN 61000-4-4 (2013-04).
• ESD - Electrostatic discharge:
IEC 61000-4-2 (2008-12 ed. 2); EN 61000-4-2 (2009-03); DIN EN 61000-4-2 (2009-12)
• Interference emission measurement:
30 MHz - 1 GHz according to EN 55016-2-3:2010 (CISPR 16-2-3)
1-6 GHz according to EN 55016-2-3:2010 (CISPR 16-2-3)
10.1.3 UKCA marking
Importer UK:
Siemens plc
Manchester M20 2UR
10.1.4 cULus approval
Introduction
The cULus approval applies to:
• Rack
• CPU modules
De󹪝nition
R
Technical speci󹪝cations
10.1 Standards and approvals
CN 4100 Communication System
Equipment Manual, 10/2021, A5E50871363-AA 61

Siemens SIMATIC CN 4100 Specifications

General

Brand	Siemens
Model	SIMATIC CN 4100
Category	Conference System
Language	English