Step by step
Report
136
Data transmission rate
The system can be connected to a PC or printer with a
V.24 adapter to display or print the ticketing report
(Æ page 130). The communication speed can be set to
ensure proper data transfer.
Required: Programming mode must be activated (*95
31994).
efd w Enter the programming code.
e.m Enter the code for the transmission (Baud) rate:
e = 9600 Baud
f = 14400 Baud
g = 19200 Baud (default)
h = 38400 Baud
i = 56000 Baud
j = 57600 Baud
k = 115200 Baud
l = 128000 Baud
m = 256000 Baud
w Initial status for programming mode.
25-digit suppression in CDR records
The last digits dialed in an external call can be sup-
pressed in the data output. They will be replaced by the
"?" symbol.
By default, no digit is suppressed.
Required: Programming mode must be activated (*95
31994).
efe w Enter the programming code.
d.m Select the number of digits to be suppressed.
w Initial status for programming mode.
To Next Page
Loading...
Need help?
General