Basic Ajustments
24
Ringing tone
The ringing tone can be ajusted by changing the tone /melo-
dy (6 levels).
Replace the handset;
h
or
i
Press one of the keys to enter the
configuration mode;
Select the display option 6 to ajust
tone/melody, pressing the key
6;
Through the keys
h
or
i
, it is
possible to control the ringing volu-
me;
Lift and replace the handset, or wait
about 5 seconds to finish the ajust-
ment;
Loudspeaker volume
The speaker volume in the E822 ST can be ajusted during
conversation.
h
or
i
Press one of the keys to configure
volume;
Ajustment indication;
Selection mode
If your HiPath 1100 system is not working for energy blackout
and the external line was switched to your telephone E 822
ST or E 821 ST, it will be necessary to ajust the selection type
for this line.
When working normally, the PBX is responsible for the exter-
nal line selection.
Replace the handset;
#=E/ F 5=D 6= K
- KKK +
- << D >> +
To Next Page
Loading...
Need help?
General