Siemens HiPath 500 User Manual (English)

Other manuals for Siemens HiPath 500

Operating Instructions236 pages

User Guide142 pages

Operating Manual106 pages

Questions and Answers:

B
Bernard ChaseSep 7, 2025
What does 'Not possible' or 'Incorrect input' mean on my Siemens HiPath 500 Telephone?
- L
  lucassmithSep 7, 2025
  If your Siemens Telephone displays 'Not possible,' 'Incorrect input,' or 'Nothing stored,' it suggests that a speed dial number is not available, an appointment was entered incorrectly, an entry is blocked or not allowed, a prerequisite is not fulfilled, or the number dialed was incomplete. Correct your input, select a permitted option, and enter the phone number in full.
L
Laura RodriguezAug 23, 2025
How to fix a Siemens Telephone with no display?
- D
  David BrownAug 25, 2025
  If your Siemens Telephone display is blank, it could be due to the handset not being switched on or the battery being empty. Try pressing the On-hook key until you receive confirmation. If that doesn't work, charge or replace the battery.
J
Jessica MartinAug 25, 2025
What to do if my Siemens Telephone doesn't react to keystrokes?
- J
  Jeffrey MooreAug 26, 2025
  If your Siemens Telephone isn't responding when you press a key, it could be that the keypad lock is activated, or the key is stuck. Try pressing the Hash key until you receive confirmation. Also, make sure the key is not physically stuck.
A
Ashley RobinsonAug 27, 2025
Why can't I dial a phone number on my Siemens HiPath 500 Telephone?
- D
  Danny RodriguezAug 27, 2025
  If you are unable to dial a phone number on your Siemens Telephone, the handset might be locked. Try unlocking the handset.
S
Sarah EatonAug 27, 2025
Why is there no sound during a call on my Siemens HiPath 500 Telephone?
- C
  Crystal MooreAug 27, 2025
  If you can't hear anything during a call on your Siemens Telephone, it's possible that the microphone and receiver are muted. This can happen if the "R key" was pressed accidentally. Press the "Delete" display key to re-activate the microphone and the receiver.
W
walterlindaAug 29, 2025
What does it mean when the line 'Base n' flashes on my Siemens Telephone?
- A
  Alexander MayAug 29, 2025
  When the line "Base n" flashes on your Siemens Telephone, it indicates that the handset is either outside the base radio range, the radio signals are too weak, the handset is not registered, or the intervals between synchronization attempts are too long. Try moving closer to the base radio range or changing your position. You may also need to register the handset or switch it off and on again.
J
Jennifer JenningsSep 13, 2025
Why does my Siemens Handsets display show 'Base n' flashing?
- B
  bsanchezSep 14, 2025
  The 'Base n' message flashes on your Siemens Handsets because the handset is out of the base radio range, the radio signals are too weak, the handset isn't registered, or the intervals between synchronization attempts are too long. Try moving closer to the base, changing your position, registering the handset, or switching the handset off and on again.
A
Anthony CallahanSep 14, 2025
What to do if my Siemens Handsets shows 'Connect' and I can't make calls?
- A
  Aaron WaltonSep 15, 2025
  If your Siemens Handsets displays 'Connect' and you can't make calls, it means the communication system is currently in use by other users. Please try your call again later.
J
Julie MoralesSep 5, 2025
Why am I hearing a de-crescendo tone sequence during input on my Siemens HiPath 500 Telephone?
- T
  Timothy ParkerSep 6, 2025
  A de-crescendo tone sequence during input on your Siemens Telephone indicates that an incorrect entry was made. Repeat the key sequence while carefully watching the display.
C
Christina NguyenSep 3, 2025
Why does my Siemens HiPath 500 Telephone say 'Please try later'?
- R
  Ronald CarrollSep 3, 2025
  If your Siemens Telephone displays 'Please try later,' it indicates that the communication system is overloaded. Wait and try again later.