en Rails
22
■ Use suitable ovenware for roasting, e.g. a roasting
dish.
pRails
Rails
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
shelves and clean them.
Detaching and refitting the rails
:Warning – Risk of burns!
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep children
away from the appliance.
Detaching the rails
1. Push the front rail forwards and up ‚ and detach it ƒ
(fig. !).
2. Then move the whole rail slightly to the rear ‚ and
remove it ƒ (fig. ").
Clean the rails with cleaning agent and a sponge. For
stubborn deposits of dirt, use a brush.
Inserting the holders
If the holders fall out when you remove the rails, these
must be re-inserted.
1. The holders at the front differ from those at the rear
(fig. !).
2. Use the hook to mount the front holder at the top
into the round hole ‚, set it at a slight incline, attach
it at the bottom, and straighten it ƒ (fig. ").
3. Use the hook to attach the rear holder into the upper
hole ‚ and push it into the lower hole ƒ (fig. #).
Attaching the rails
When hanging the rails, ensure that the sloping edge is
at the top of the rail.
The rails only fit on the right or the left side. The pull-out
rails must pull out forwards.
1. Mount the rear of the frame at the top and bottom ‚
and pull it forwards ƒ (fig. !).
2. Then insert it at the front ‚ and push it down ƒ
(fig. ").
D
E
2
D
E
1
D
E
21
D
E
D
E
2
D
E
1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
