What to do if the flame failure device of Siemens burners doesn't work?
If the flame failure device on your Siemens Hob burners isn't working, it could be because the control knob hasn't been held down long enough. Once the burner is lit, keep the control knob pressed for a few more seconds. Also, the grooves on the burners' gas outlets might be dirty, so clean them.
Step-by-step guide for manually igniting a gas burner.
Instructions for automatic ignition using sparkers and troubleshooting.
Explanation of the thermocouple safety feature on each burner.
Procedure for turning off a gas burner using its control knob.
Details on how to control burner power and examples for dual flame burners.
Important operational notes, sounds, cleaning ignition sparkers, flame color, ventilation.
How to program and use the countdown timer function.
Instructions for programming a burner to switch off automatically.
To Next Page
General