EasyManua.ls Logo

Siemens iQ100 SN61HX02TG User Manual

Siemens iQ100 SN61HX02TG
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SN61HX02TG
Dishwasher
EN Information for Use
Siemens Home Appliances
Register your appliance on My Siemens and
discover exclusive services and offers.

Table of Contents

Other manuals for Siemens iQ100 SN61HX02TG

Question and Answer IconNeed help?

Do you have a question about the Siemens iQ100 SN61HX02TG and is the answer not in the manual?

Siemens iQ100 SN61HX02TG Specifications

General IconGeneral
BrandSiemens
ModeliQ100 SN61HX02TG
CategoryDishwasher
Energy Efficiency ClassE
Capacity13 place settings
Noise Level48 dB
Water Consumption per Cycle9.5 liters
Dimensions (HxWxD)81.5 x 59.8 x 55 cm
Number of Programs6
Appliance PlacementBuilt-in
Control Panel ColourBlack
Number of Washing Programs6
Drying SystemHeat exchanger
AquaStop FunctionYes
Washing ProgramsAuto, Eco, Glass
Product SizeFull size

Summary

Safety Instructions

1.4 Safe Installation

Critical warnings and instructions for preventing injury during installation.

Safe Use and Appliance Care

1.5 Safe Use

Safety precautions related to electrical hazards and proper appliance connection.

1.6 Damaged Appliance

Guidelines for operating a damaged appliance and risks of electric shock.

Preventing Material Damage

2.1 Safe Installation

Instructions to prevent appliance damage from improper installation and water hoses.

2.2 Safe Use

Precautions against damage from steam, salt, and unsuitable cleaning agents.

Installation and Connection

4.2 Installing and Connecting the Appliance

Steps for positioning and securing the appliance in a kitchen unit.

4.3 Drainage Connection

Instructions for connecting the wastewater hose for proper drainage.

4.4 Drinking Water Connection

Guidelines for connecting the appliance to a potable water supply.

4.5 Electrical Connection

Steps for safely connecting the appliance to the mains electricity supply.

Familiarising Yourself with Your Appliance

5.2 Controls

Explanation of the control panel buttons and their functions.

Programmes

Before First Use

9.1 Performing the Initial Configuration

Steps for initial setup including salt, rinse aid, and water hardness settings.

Water Softening System

10.2 Setting the Water Softening System

Step-by-step guide to configuring the water hardness setting on the appliance.

10.3 Special Salt

Adding special salt to the dispenser for water softening.

Rinse Aid System

11.2 Setting the Amount of Rinse Aid

Adjusting the rinse aid dosage to prevent streaks or water marks on tableware.

Detergent Usage

12.1 Suitable Detergents

Discusses types of detergents (tabs, powder, liquid, combined) and their usage.

12.4 Adding Detergent Correctly

Step-by-step guide on how to open the dispenser and add detergent.

Tableware Care

13.1 Damage to Glass and Tableware

Identifies unsuitable tableware and causes of damage during dishwashing.

Basic Operation

14.1 Switching On the Appliance

Steps to power on the appliance and the default Eco 50° programme.

Basic Settings Configuration

Home Connect Features

16.1 Setting up the Home Connect App

Installing and setting up the mobile app for appliance control.

16.2 Setting up Home Connect

Connecting the appliance to the WLAN network and the Home Connect app.

Cleaning and Servicing

17.5 Filter System Maintenance

How to clean the micro, fine, and coarse filters to prevent blockages.

17.6 Cleaning Spray Arms

Steps to clean the upper and lower spray arms, and clear nozzles.

Troubleshooting Common Faults

Check Water Supply Fault and Display Flashes

Actions for 'Check water supply' faults and troubleshooting flashing displays.

Transportation, Storage, and Disposal

18.1 Clean Wastewater Pump

Detailed instructions for cleaning the wastewater pump, including safety warnings.

19.1 Removing the Appliance

Steps to safely disconnect and remove the appliance from its installation.

Related product manuals