Siemens iQ300 KU22L Series - 4.3 Appliance Installation; 4.4 First-Time Appliance Preparation; 4.5 Electrical Connection

Installation and connection en
11
Niche width
An inside niche width of at least
600mm is required for the appli-
ance.
Over-and-under and side-by-side
installation
If you want to install 2 refrigerating
appliances one over the other or side
by side, you must maintain a clear-
ance of at least 150mm between the
appliances. Selected appliances can
be installed without a minimum clear-
ance. Ask your dealer or kitchen
planner about this.
4.3 Installing the appliance
WARNING
Risk of electric shock!
Liquid in the control elements may be
dangerous.
▶ Always install the enclosed niche
cover in accordance with the en-
closed installation instructions.
▶ Install the appliance in accordance
with the enclosed installation in-
structions.
4.4 Preparing the appliance
for the first time
1. Remove the informative material.
2. Remove the protective foil and
transit bolts, e.g. remove the ad-
hesive strips and carton.
3. Clean the appliance for the first
time. →Page22
4.5 Connecting the appliance
to the electricity supply
1. Insert the non-heating appliance
plug of the power cable into the
appliance.
2. Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate. →"Appliance", Fig. 1 /
3
,
Page13
3. Check the mains plug is inserted
properly.
a The temperature display shows an
animation and the control panel is
locked.
a The appliance is ready to use once
the animation has ended and an
LED lights up for the temperature
display.