Basic operation en
15
Basic operation
7 Basic operation
Basic operation
7.1 Switching on the appli-
ance
1. Electrically connect the appliance.
→Page11
Note:If the appliance has been
previously switched off using the
control panel, press and hold
for threeseconds.
a The temperature display shows an
animation and the control panel is
locked.
a The appliance is ready to use once
the animation has ended and an
LED lights up for the temperature
display.
a The appliance begins to cool.
2. Set the required temperature.
→Page15
7.2 Operating tips
¡ Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the set temperature has
been reached.
¡ When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
¡ The temperature in the appliance
varies due to the following condi-
tions:
– How often the appliance is
opened
– Load capacity
– Temperature of newly stored
food
– Ambient temperature
– Direct sunlight
7.3 Switching off the appli-
ance
▶ Press and hold for 3seconds.
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
▶ Press repeatedly until the tem-
perature display shows the re-
quired temperature setting.
The recommended temperature in
the refrigerator compartment is
4°C.
→""OK" sticker", Page19
Setting the freezer compartment
temperature
▶ In order to set the freezer compart-
ment temperature, change the re-
frigerator compartment temperat-
ure →Page15.
The refrigerator compartment tem-
perature influences freezer com-
partment temperature. Refrigerator
compartment temperatures that
are set to warm generate warmer
freezer compartment temperatures.
Additional functions
8 Additional functions
Additional functions
Find out which additional functions
can be used for your appliance. Addi-
tional functions can be set via the
HomeConnect app.
8.1 Super function
With the Super function, the refriger-
ator compartment and the freezer
compartment cool more intensively.
Switch on the Super function 4 to
6hours before placing food weighing
2kg or more.