en Favourite button
12
Once the corresponding time has elapsed, the ventila-
tion system switches off automatically. This time de-
pends on the operating mode in which the appliance is
installed.
When the ventilation system is switched on, the ventila-
tion setting lights up. The ventilation system can be
switched off at any time by pressing the ventilation
sensor.
Favourite button
11 Favourite button
You can use the function to select two functions or
cooking settings which can then be quickly accessed
on .
11.1 Assigning Favourite button functions
Requirement:Connect the appliance to Home Con-
nect. You can find more information about this under
Home Connect
1.
To assign functions, open the Home Connect app
and follow the instructions.
2.
As soon as you have assigned the functions, you
can use them:
a Function 1: Press briefly.
a Function 2: Press and hold .
Note:If you have not assigned any functions,
switches off once the hob is switched on.
combiZone
12 combiZone
It allows two cooking zones of the same size to be
combined, with the same power level being switched
on in both. This is intended in particular for cooking
with long cookware.
This function allows you to cook with one item of cook-
ware that occupies one cooking zone and that can be
moved from one zone to another for increased conveni-
ence. In this case, the two zones also retain the same
power level and the same settings.
12.1 Positioning the cookware
Use cookware that fits into the cooking zones.
12.2 Switching on combiZone
1.
Select one of the two cooking zones and set the
power level.
2.
Press .
a The function is activated.
12.3 Switching off combiZone
▶
Touch .
a The function is switched off.
a The two cooking zones once again operate inde-
pendently of one another.
Time-setting options
13 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
The button is assigned to the Switch-off timer func-
tion by default. However, you can also assign one of
the above-mentioned functions to the sensor.You can
change these settings via the Home Connect app or in
the basic settings →Page16.
13.1 Switch-off timer
Allows you to programme a cooking time for one or
more cooking zones and their automatic switch-off
once the time set has elapsed.
Switching on Switch-off timer
1.
Select the cooking zone and the power level.
2.
Press .
a and light up.
3.
Within the next 10seconds, set the required cook-
ing time in the settings area.
4.
Touch to confirm.
a Once the cooking time has elapsed, the cooking
zone is switched off and a signal sounds.
Notes
¡ If a cooking time has been programmed in a cook-
ing zone in which the fryingSensor is activated, the
programmed cooking time will start to count down
as soon as the selected temperature level has been
reached.
To Next Page
Loading...
