Need help?Do you have a question about the Siemens Iq500 ED851HQ26E and is the answer not in the manual?
General safety precautions for appliance use and storage.
Specifies the correct and incorrect uses of the appliance.
Defines user groups who can safely operate the appliance.
Provides crucial safety instructions and warnings for safe operation.
Explains how cookware size and material affect performance and detection.
Detailed explanation of the hob's control panel and its touch fields.
Details the operation and requirements of ventilation modes.
Step-by-step instructions for turning the hob on, off, and setting power levels.
Activating and deactivating functions for rapid heating and quick pan heating.
Activating, deactivating, and using fryingSensor with cookware and recipe tips.
Activating, deactivating, and setting the automatic childproof lock.
Summary of basic settings and procedure to access and modify them.
Procedure for testing cookware suitability and interpreting results.
Important safety warnings and explanation of fault codes and display indicators.
This document provides comprehensive information for the safe and efficient use of your Siemens induction hob with an integrated ventilation system. It covers everything from initial setup and basic operation to advanced cooking functions, maintenance, and troubleshooting.
The appliance is designed for preparing meals and drinks under supervision in private households and enclosed domestic spaces, up to an altitude of 2000 meters above sea level. It should not be used on boats, in vehicles, or with external timers/remote controls (unless specifically designed for such operation). It is also not intended for extracting hazardous, explosive substances, or small parts and liquids.
Safety is paramount. Always read the instruction manual carefully and keep it, the appliance, and product information safe for future reference. Do not connect a damaged appliance. Only a licensed professional should connect the appliance, as incorrect connection voids the warranty.
Restriction on user group: Children aged 8 or over, and individuals with reduced physical, sensory, or mental abilities, or inadequate experience, may use the appliance if supervised and instructed on safe use. Children must not play with the appliance or perform cleaning/maintenance unless they are at least 15 years old and supervised. Keep children under 8 away from the appliance and power cable.
Risk of suffocation: Keep small parts and packaging material away from children.
Risk of poisoning: If operating the appliance in exhaust air mode simultaneously with a room-air-dependent heat-producing appliance (e.g., gas, oil, wood, or coal heaters), ensure adequate fresh air supply to prevent flue gases from being drawn back into the living space. Consult a chimney sweep to assess ventilation and suggest suitable measures. Unrestricted operation is possible in circulating-air mode.
Risk of fire: Never leave hot oil or fat unattended, as it can lead to fires. Do not use water to extinguish a fire; instead, switch off the appliance and cover with a lid or fire blanket. The cooking surface becomes very hot, so never place flammable objects or other items on it. Do not store combustible objects or aerosol cans in drawers directly underneath the hob. Do not use hob covers. Always switch off the hob using the main switch after every use. Fatty deposits in grease filters can catch fire, so never operate without a grease filter and clean them regularly. Avoid naked flames near the appliance and do not install it near solid fuel heating appliances unless they have a sealed, non-removable cover.
Risk of burns: The appliance and its parts, especially the hob surround, become hot during use. Exercise caution to avoid touching heating elements. Keep young children under 8 away. Never use hob protective grilles. Metal objects on the hob quickly become hot, so do not place knives, forks, spoons, or lids on it. Allow the appliance to cool down before cleaning. If hot liquids penetrate, only remove the grease filter or overflow container after cooling.
Risk of electric shock: Improper repairs are dangerous. Only trained specialist staff should carry out repairs using genuine spare parts. If the power cord is damaged, it must be replaced by the manufacturer or Customer Service. Never operate a damaged appliance or one with a cracked surface. Do not pull the power cord to unplug; always unplug at the mains. If the appliance or power cable is damaged, immediately switch off the fuse in the fuse box and call Customer Service. Do not use steam or high-pressure cleaners. Prevent electrical appliance cables from touching hot parts of the appliance.
Risk of injury: Saucepans may jump due to liquid between the base and hotplate. Always keep hotplates and saucepan bases dry. Do not use icy-cold cookware from the freezer.
To prevent damage, monitor cooking processes, especially with high-sugar content foods, and remove spills immediately with a glass scraper. Use suitable, good-condition cookware. Clean the hob only when cold, using cleaning agents suitable for glass ceramic. Avoid hitting the glass or dropping objects on it. Lift cookware when moving it to prevent scratches. Do not use the hob as a work surface or storage space. Never use frozen or empty cookware on a hot cooking zone. Do not place greaseproof paper, aluminum foil, plastic containers, or pot lids on the hob. Avoid placing hot cookware on the control panel or frame. If the appliance surface is cracked, do not use it.
Disposing of packaging: Packaging materials are environmentally compatible and recyclable. Sort components by type and dispose of them separately.
Saving energy: Select cooking zones to match pan size, centering cookware on the hob. Use cookware with a base diameter similar to the hotplate. Large cookware with little food requires more energy. Cook with minimal water. Reduce power levels early on. Adjust fan speed to steam production; lower speeds consume less energy. Switch off the appliance when not in use. Ensure sufficient ventilation during cooking for efficiency and reduced noise. Clean or replace filters regularly to maintain effectiveness.
Cookware for induction cooking must have a ferromagnetic base (attracted by a magnet) and match the cooking zone size. If cookware isn't detected, try a smaller diameter zone.
Cookware materials and properties:
Notes: Do not use adapter plates. Do not heat empty cookware or thin-based cookware, as they can become very hot. Use the "Cookware test" function (Page 17) to check suitability.
The appliance consists of a hob (3), control panel (4), grease filter (1), odour filter for circulating-air mode or acoustics filter for air extraction mode (2), and an overflow container (5).
Special accessories: Depending on the model, various accessories like air extraction/recirculation sets, odour filters, and acoustics filters are available from specialist retailers, after-sales service, or the official website.
Control panel: Features a main switch (①), cooking zone selectors (--), a settings area, and a powerBoost (boost) button. Keep the control panel clean and dry. Avoid placing cookware near displays or buttons to prevent overheating.
Cooking zones:
Residual heat indicator: Displays 'H' for hot and 'h' for warm. Do not touch a cooking zone if the indicator is lit.
Saturation indicator: Displays 'F' when anti-odour filters are saturated and need replacement.
If connected to Home Connect, some functions may be available via software updates. More information is available on the Siemens Home website.
The appliance can operate in air extraction mode or circulating-air mode.
Air extraction mode: Air is cleaned by grease filters and conveyed outside via a pipe system. The exhaust air must not be discharged into a flue used for other fuel-burning appliances. If discharging into a non-functioning flue, obtain consent from a heating engineer. If discharging through an external wall, use a telescopic duct. Ensure adequate fresh air supply when operating simultaneously with room-air-dependent heat-producing appliances.
Air recirculation mode: Air is cleaned by grease filters and an odour filter, then returned to the room. An odour filter must be installed. Various options for this mode are in the catalogue or available from dealers/specialists. When cooking intensively, ventilate the kitchen adequately (e.g., by opening a window) to remove excessive moisture.
Initial cleaning: Remove packaging, wipe the hob surface with a damp cloth. Recommended detergents are on the Siemens Home website.
Preparing the appliance: Insert the filter and then the metal grease filter. Never operate without the metal grease filter and overflow container.
Cooking with induction: Induction technology offers time and energy savings, easier cleaning, and improved heat control as heat is generated directly in the cookware.
Cookware: A list of recommended cookware is on the Siemens Home website.
Setting the operating mode: The appliance is supplied with a preset circulating-air mode. If installed with an air outlet to the outside, configure setting 'c 17' to air extraction mode (see "Basic settings," Page 16).
Setting Home Connect: When first switched on, the appliance prompts to set up the home network. Touch the Home Connect button to begin the connection process (see "Home Connect," Page 18). The setting can be adjusted later.
Switching on the hob: Touch ①. A signal sounds, cooking zone symbols and available functions light up, and '0' lights up in cooking zone displays. The hob is ready.
reStart: If switched on within four seconds of being switched off, the hob resumes previous settings.
Switching off the hob: Touch ① until displays go out. All cooking zones switch off. If all zones are off for over 59 seconds, the hob automatically switches off.
Setting power level: Each cooking zone has 17 power levels (1 to 9 with intermediate values). Touch the cooking zone display and then select the power level in the settings area. If no cookware is present or suitable, the selected power level flashes, and the zone switches off after a period.
quickStart: If cookware is placed on a zone before switching on, the hob detects it and automatically selects the zone. Select the power level within 59 seconds, or the hob switches off.
Changing/switching off power level: Select the cooking zone, then select a new power level or set to '0'.
Cooking tips: Stir purees, cream soups, or thick sauces occasionally. Preheat to power level 8-9. Reduce power level when steam escapes from lidded cooking. Place a lid on cookware after cooking. Follow pressure cooker instructions. Avoid overcooking to preserve nutrients. Ensure oil doesn't smoke. Fry food in small portions. Use oven gloves for hot cookware. Refer to "Saving energy" (Page 5) for energy-efficient cooking.
The cooking zone has an integrated air extraction system. Functions for controlling it are described below. Factory settings can be changed (see "Basic settings," Page 16). Use shallow cookware for better performance; with deep cookware, angle the lid.
Automatic start: If a power level is assigned to the first cooking zone, the air extraction system starts automatically, and the ventilation setting lights up on the sensor. The setting can be changed or deactivated.
Ventilation settings: The board has 9 ventilation settings.
Intensive ventilation settings: Two intensive settings provide higher power for a short time.
Fan run-on: The ventilation system continues to run for a few minutes after the cooking zone is switched off (if the zone was on for at least one minute and the ventilation system was running).
Use this button (✩) to quickly access two pre-assigned functions or cooking settings.
Assigning functions: Connect the appliance to Home Connect (see "Home Connect," Page 18). Open the Home Connect app and follow instructions. Once assigned, press ✩ briefly for Function 1, or press and hold ✩ for Function 2. If no functions are assigned, ✩ switches off after the hob is switched on.
This function combines two cooking zones of the same size, operating at the same power level, ideal for long cookware. It also allows moving cookware between these two zones while retaining the same power level and settings.
Positioning cookware: Use cookware that fits the cooking zones.
Switching on: Select one of the two cooking zones and set the power level. Press. The function activates.
Switching off: Touch. The function switches off, and the two cooking zones operate independently again.
The hob has a Switch-off timer and a Timer. By default, 00 is assigned to the Switch-off timer, but this can be changed via the Home Connect app or basic settings (see "Basic settings," Page 16).
Switch-off timer: Programs a cooking time for one or more zones, which automatically switch off when the time elapses.
Timer: Activates a clock independently of cooking zones. It does not automatically switch off cooking zones.
This function heats large quantities of water faster than power level 9. It's available for all cooking zones, provided the other zone on the same side is not in use. Otherwise, 'b' and '9' flash, and '9' is set automatically without activating powerBoost.
Switching on: Select cooking zone. Touch boost. The 'b' display lights up, and the function activates.
Switching off: Select cooking zone. Touch boost. The 'b' display goes out, the zone returns to power level 9, and the function switches off. The appliance may switch off this function to protect internal electronic elements.
This function heats pans more quickly than power level 9. Do not use with frying pans, as it may damage the coating. Activate via Home Connect or the Favourite button. Available for all cooking zones, provided the other zone on the same side is not in use. Otherwise, 'P' and '9' flash, and 'S' is set automatically.
Recommended applications: Use only cold pans with a completely flat base. Do not use thin-based pans. Do not place a lid on the pan. Never leave pans unattended during heating.
Switching on: Assign the function to ✩ (see "Favourite button," Page 12). Select cooking zone. Touch ✩. 'P' lights up, and the function activates.
Switching off: Select cooking zone. Select the power level. 'P' goes out, and the function switches off. This function automatically switches off after 30 seconds to avoid high temperatures.
This function melts chocolate or butter and keeps meals warm. Activate via Home Connect or the Favourite button.
Switching on: Assign the function to ✩ (see "Favourite button," Page 12). Select cooking zone. Touch ✩. 'L' lights up, and the function activates.
Switching off: Select cooking zone. Set to '0'. 'L' goes out, and the function switches off.
This function controls temperature for melting, preparing sauces, sautéing, deep frying, or frying. Instead of constantly adjusting power, select a target temperature. Sensors under the glass ceramic measure and maintain this temperature. Available on all cooking zones marked with the fryingSensor symbol.
Recommended cookware: Special cookware designed for this function is available from Customer Service, retailers, or the online shop. Other cookware can be used, but temperature may vary.
Switching on: Place empty cookware on a cooking zone. Select the zone. Press. 'I' and the preset temperature light up. Select temperature by swiping the settings area. 'I' flashes until the set temperature is reached. A signal sounds, and 'I' and the temperature symbol stop flashing. Add frying fat, then food. If using over 250 ml oil, add oil and wait a few seconds before adding food.
Switching off: Select cooking zone. Touch.
This feature prevents children from switching on the hob.
Switching on: Hob must be switched off. Switch on the hob (①). Touch and hold 00 for 4 seconds. 00 lights up for 10 seconds. The hob is locked.
Deactivating: Switch on the hob (①). Touch and hold 00 for 4 seconds. The lock releases.
Automatic childproof lock: This can be activated every time the hob is switched off (see "Basic settings," Page 16).
This function pauses and resumes active cooking processes for up to 10 minutes without changing settings. It can be used to clean the control panel.
Activating: Press 00. 'II' lights up in cooking zone displays. All active cooking processes stop, settings are retained, and the function activates.
Deactivating: Touch 00. The function switches off, and cooking processes resume. The cooking zone automatically switches off after approximately 10 minutes.
This safety function activates if a cooking zone operates for an extended period without changes. The cooking zone displays 'FB' and switches off. The time depends on the selected power level (e.g., 1.0-1.5 for 10 hours, 8.0-9.0 for 1 hour). Press any button to switch on the cooking zone.
Configure appliance settings to meet your needs.
Overview of settings:
Accessing basic settings: Hob must be switched off. Switch on (①). Within 10 seconds, touch and hold 00 for 4 seconds. Touch 00 repeatedly to cycle through settings. Select desired setting in the settings area. Touch and hold 00 for 4 seconds to save.
Discarding changes: Touch ①. All changes are discarded.
This function tests cookware quality, which significantly influences cooking speed and results. Before testing, ensure cookware base diameter matches the cooking zone. Access via basic settings (c 12).
Carrying out test: Place cookware with approx. 200 ml water on the center of the best-fitting cooking zone. Call up basic settings, select c 12. Touch settings area. 'u' flashes. After 10 seconds, the result appears in the cooking zone displays.
Checking result:
This network-capable appliance can be controlled via the Home Connect app on a mobile device to adjust functions, basic settings, and monitor status. Availability of Home Connect services varies by country (check www.home-connect.com). The app guides you through the login process.
Tips: Consult Home Connect documents and app instructions.
Notes: Observe safety precautions from this manual when using the app. Hobs are not designed to be left unattended. Appliance operation takes priority over app control. In networked standby, the appliance consumes max 2 W.
Setting up Home Connect:
Wi-Fi symbol: Indicates Wi-Fi status and connection quality.
Adding/removing Wi-Fi network:
Changing settings via app: Hob must be connected to Wi-Fi and app. Select setting in app and send to hob. Confirm on hob. Display flashes when settings are transmitted. Press any other touch field to discard.
Activating automatic presence detection¹: Allows confirming settings from mobile device without touching the hob, if near the hob.
Software update: Appliance software can be updated for optimization, troubleshooting, or security. Requires registered Home Connect user, app installed, and connection to Home Connect server.
Remote diagnostics: Customer Service can access your appliance remotely if you contact them, have it connected to the Home Connect server, and if Remote Diagnostics is available in your country. Visit www.home-connect.com for details.
Data protection: Initial registration transmits unique appliance identification, security certificate, current software/hardware version, and previous factory reset status to the Home Connect server. This is for initial setup of Home Connect functions. Data protection information is in the Home Connect app.
Regular cleaning and maintenance ensure long-term efficiency.
Cleaning products: Obtain suitable cleaning products and glass scrapers from Customer Service, retailers, or the online shop.
Cleaning the hob: Clean after every use to prevent burnt-on residues. Hob must be cold, unless there are sugar stains, rice starch, plastic, or aluminum foil, which should be removed while hot.
Cleaning profiles: Clean profiles if dirty or stained. Do not use a glass scraper.
Grease filter: Filters grease from kitchen steam. Comprises a container and two removable filters. Clean regularly for good working order.
Odour filter or acoustics filter: Obtain from retailers, Customer Service, or online shop.
Resetting saturation indicator: After appliance is off, 'F' lights up.
Cleaning overflow container: Collects liquids or objects.
Rectify minor faults yourself before contacting after-sales service.
Warnings:
Information on display panel:
Normal noises: Induction hobs may produce buzzing, crackling, hissing, fan, or rhythmic noises.
Disposing of old appliance:
Obtain function-relevant genuine spare parts for at least 10 years from market placement. Warranty terms are on the website. For Customer Service, provide product number (E-Nr.), production number (FD), and consecutive numbering (Z-Nr.), found on the rating plate (underside of hob, towards front, or on glass ceramic). Also displayed in basic settings (Page 16).
This product includes free and open-source software components. Licence information is stored on the appliance, accessible via Home Connect app ("Profile -> Legal information -> Licence Information") or the brand product website. Request relevant information from ossrequest@bshg.com or BSH Hausgeräte GmbH. Source code available on request (ossrequest@bshg.com). Cost of fulfilling request charged to you. Offer valid for three years from purchase or as long as support/spare parts are offered.
BSH Hausgeräte GmbH declares appliance with Home Connect functionality conforms to Directive 2014/53/EU. Detailed RED Declaration of Conformity online at siemens-home.bsh-group.com. For UK, BSH Hausgeräte GmbH declares compliance with relevant statutory requirements. Detailed Declaration of Conformity online at siemens-home.bsh-group.com/uk/. 2.4 GHz band (2400-2483.5 MHz): Max. 100 mW.
General| Type | Induction Hob |
|---|---|
| Cooking Zones | 4 |
| Power Levels | 17 |
| Boost Function | Yes |
| Timer | Yes |
| Total Power | 7400 W |
| Installation Type | Built-in |
| Color | Black |
| Material | Glass ceramic |
| Safety Features | Child Lock, Residual Heat Indicator, Automatic Safety Shut Off |
| Control Type | Touch Control |
To Next Page