en Software update
8
Sensor Function
Automatic linking/separating of cooking
zones
fryingSensor
Timer functions
Pause
Childproof lock
Favourite button
Connectivity
Indicators/symbols
Display Function
Switch-off timer
fryingSensor
- Power levels
Childproof lock
Buttons in connection with Home Connect
As soon as the connection to Home Connect has been
established, the following buttons and displays are
available:
Sensor Function
Accept settings from another appliance
If lights up, search for further information in the
HomeConnect app.
5.4 Distribution of the cooking zones
The specified power has been measured with the
standard pots which are described in IEC/EN
60335-2-6. The power may vary depending on the size
of the cookware or cookware material.
Area Highest setting
21 cm diameter Power level 9
powerBoost
2500W
3700W
21 x 38 cm Power level 9 3600W
At power level 9, the hob reaches the power indicated
in the table in order to reduce the preheating times and
keeps them running for a certain time, provided the
other cooking zone on the same side is not in use.
5.5 Cooking zone
Before you start cooking, check whether the size of the
cookware fits the cooking zone that you want to use for
cooking:
Area Cooking zone type
Single-circuit cooking zone
Combi cooking zone →Page12
5.6 Residual heat indicator
The hob has a residual heat indicator for each cooking
zone. Do not touch the cooking zone if the residual
heat indicator is lit.
Display Meaning
The cooking zone is hot.
The cooking zone is warm.
5.7 Saturation indicator
The hob is equipped with a saturation indicator. When
the anti-odour filters are saturated, lights up and the
filter must be replaced.
→"Odour filter or acoustics filter", Page21
Software update
6 Software update
If the appliance is connected to HomeConnect, some
functions may be available with a software update.
More information on the availability of additional func-
tions can be found on the website siemens-home.bsh-
group.com
To Next Page
Loading...
