en Defrosting
30
partment) shows the required
water dispensing time in
seconds.
a The new amount of water is saved
and will be dispensed for the bottle
fill option.
Permanent light
If you do not dispense ice or water
for some time, the light switches itself
off.
You can permanently switch on the
light on the ice and water dispenser.
Switching on the permanent light
1. To activate setting mode, touch the
lower area of the control panel.
2. Press light.
a light lights up.
Switching off the permanent light
1. To activate setting mode, touch the
lower area of the control panel.
2. Press light.
a light goes out.
Switching on ice cube production
1. To activate setting mode, touch the
upper area of the control panel.
2. Press iceoff.
a Ice cube production starts and the
selection option that was last used
lights up.
Switching off ice cube production
1. To activate setting mode, touch the
upper area of the control panel.
2. Press iceoff.
a The ice dispenser and ice cube
production stop.
Defrosting
14 Defrosting
Defrosting
14.1 Defrosting in the refri-
gerator compartment
The refrigerator compartment in your
appliance defrosts automatically.
14.2 Defrosting in the freezer
compartment
The fully automatic NoFrost system
ensures that the freezer compartment
remains frost-free. Defrosting is not
required.
Cleaning and servicing
15 Cleaning and servi-
cing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Customer Service must clean inac-
cessible points. Cleaning by cus-
tomer service can give rise to costs.
15.1 Preparing the appliance
for cleaning
1. Switch off the appliance.
→Page19
2. Disconnect the appliance from the
power supply.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
3. Take out all of the food and store it
in a cool place.
Place ice packs (if available) onto
the food.
4. Remove all fittings and accessor-
ies from the appliance.
→Page32
To Next Page
Loading...
