Siemens iQ700 LC68BUV50 - 6 Before using for the first time; 7 Basic operation; 7.1 Switching on the appliance; 7.2 Switching off the appliance

en Familiarising yourself with your appliance
6
Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching the lighting on or off
Setting the brightness
Switching on the boost function
Switching automatic mode on or off
Decreasing the fan setting
Fan settings/intensive modes settings area
Increasing the fan setting
Switching on intensive mode
5.2 Display
You can see the current setting values in the display.
Grease filter saturation indicator
Odour filter saturation indicator
- Fan settings
Intensive mode
Fan run-on
HomeConnect
Before using for the first time
6 Before using for the first time
Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Note:When using it in circulating-air mode, you require
additional accessories.
▶
When using it in circulating-air mode, set the operat-
ing mode.
Basic operation
7 Basic operation
Basic operation
7.1 Switching on the appliance
▶
Press ⁠.
a The appliance starts at fan setting2.
7.2 Switching off the appliance
▶
Press ⁠.
7.3 Selecting a fan setting
▶
Slide your finger over the settings area ⁠.
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
▶
Press or slide your finger to the right over the set-
tings area until appears on the display.
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
7.5 Switching off intensive mode
▶
Slide your finger to the left over the settings area
⁠.