EasyManuals Logo

Siemens LC67KHM60 User Manual

Siemens LC67KHM60
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Trouble shooting en
9
3Trouble shooting
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
:Warning
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Malfunction table
--------
LED lights
Defective LED lights may be replaced by the
manufacturer, their customer service or a qualified
technician (electrician) only.
:Warning
Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly
into the switched on LED lights for longer than 100
seconds.
4Customer service
Customer service
When calling us, please quote the product number (E
no.) and the production number (FD no.) so that we can
provide you with the correct advice. These numbers can
be found on the rating plate on the top of the appliance.
You can make a note of the numbers of your appliance
and the telephone number of the after-sales service in
the space below to save time should it be required.
Please be aware that a visit by an after-sales engineer
will be charged if a problem turns out to be the result of
operator error, even during the warranty period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
Problem Possible cause Solution
The appliance
does not work
The plug is not
plugged in.
Connect the appliance to the
electricity supply
Power cut Check whether other kitchen
appliances are working
Faulty fuse Check in the fuse box to make
sure that the fuse for the
appliance is OK
The lighting does
not work.
The LED lights
are defective.
Call the after-sales service.
The button illumi-
nation does not
work.
The control unit is
faulty.
Call the aftersales service.
E no. FD no.
After-sales serviceO
GB 0344 892 8999
Calls charged at local or mobile rate.
IE 01450 2655
0.03 € per minute at peak. Off peak 0.0088
per minute.
=1U)'(1U
7\SH

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens LC67KHM60 and is the answer not in the manual?

Siemens LC67KHM60 Specifications

General IconGeneral
Noise level67 dB
Intensive speedYes
Number of speeds4
Type of extractionDucted/Recirculating
Noise level (low speed)48 dB
Maximum extraction power660 m³/h
Noise level (high speed)68 dB
Maximum recirculating power570 m³/h
Minimum distance from gas hob600 mm
Noise level (intensive speed)74 dB
Fluid dynamic efficiency classA
Grease filtering efficiency classC
Minimum distance from electric hob450 mm
TypeWall-mounted
Cord length1.3 m
Control typeTouch
Product colorBlack, Stainless steel
Built-in displayNo
Compatible productsCE, VDE
Exhaust connection diameter120 mm
Bulb typeLED
Bulb power1.5 W
Illuminance90 lx
Number of bulbs2 bulb(s)
Grease filter typeAluminum
Current10 A
Motor power- W
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Annual energy consumption52.5 kWh
Weight and Dimensions IconWeight and Dimensions
Depth499 mm
Width590 mm
Height- mm
Weight27000 g
Height (max)1198 mm
Height (min)928 mm
Height without chimney323 mm

Related product manuals