15
221
Gas: sonda rilevazione fiamma attivo (valore
fabbrica = 1)
Gas: active detector flame evaluation (default
value = 1)
0 = QRB../QRC..
1 = ION / QRA..
OEM / Service x x x
222
Gas: Preventilazione (valore fabbrica = 1)
1 = attivo
0 = non attivo
ATTENZIONE : In ambito civile la norma
EN676 rende obbligatoria la preventilazione.
In ambito industriale, vedere i casi in cui la
norma EN746-2 prevede la possibilità di non
fare la preventilazione.
In questi ultimi casi il bruciatore deve essere
costruito obbligatoriamente con controllo di
tenuta e valvole gas in classe A
Gas: Pre-purging (default value = 1)
1 = active
0 = deactivated
WARNING: in the civil field, the prepurge is
mandatory according to the standard EN676.
In the industrial fiels, check if the pre purge
can be avoided according to the stanrds
EN746-2
If the prepurge is not performed, the burner
must be equipped with two valves and the
proving system.
OEM / Service x x x
223
Limite ripetizioni pressostato gas di minima
pressione (valore fabbrica = 16 - range impo-
stazione:1 - 16)
Repetition limit pressure switch-min-gas
(default value = 16 - range:1 - 16) OEM / Service x x x
225
Gas: tempo di preventilazione (valore fab-
brica = 20s - range impostazione:20s - 60min)
Gas: Prepurge time (default value = 20s -
range:20s - 60min)
OEM / Service x x x
226
Gas: tempo di preaccensione (valore fab-
brica = 2s - range impostazione:0.2s - 60min)
Gas: Preignition time (default value = 2s -
range: 0.2s - 60min)
OEM / Service x x x
227
Gas: tempo di sicurezza 1 (TSA1) (valore
fabbrica = 3s - range impostazione:0.2 - 10s)
Gas: Safety time 1 (TSA1) (default value =
3s - range: 0.2 - 10s)
OEM x x x
229
Gas: tempo di risposta a cadute di pressione
entro TSA1 e TSA2 (valore fabbrica = 1.8s -
range impostazione:0.2s - 9.8s)
Gas: time to respond to pressure faults in
TSA1 e TSA2 (default value = 1.8s - range:
0.2s - 9.8s)
OEM x x x
230
Gas: Intervallo 1 (valore fabbrica = 2s -
range impostazione:0.2s - 60min)
Gas: Interval 1 (default value = 2s - range:
0.2s - 60min)
OEM / Service x x x
231
Gas: tempo di sicurezza 2 (TSA2) (valore
fabbrica = 3s - range impostazione:0.2 - 10s)
Gas: Safety time 2 (TSA2) (default value = 3s
- range:0.2 - 10s)
OEM x x x
232
Gas: Intervallo 2 (valore fabbrica = 2s -
range impostazione:0.2s - 60min)
Gas: Interval 2 (default value = 2s -
range:0.2s - 60min)
OEM / Service x x
233
Gas: Tempo postcombustione (valore fab-
brica = 8s - range impostazione:0.2s - 60s)
Gas: postcombustion time (default value = 8s
- range:0.2s - 60s)
OEM / Service x x x
234
Gas: Tempo postventilazione (valore fab-
brica = 0.2s - range impostazione:0.2s -
180min)
Gas: Postpurge time (default value = 0.2s -
range:0.2s - 180min) OEM / Service x x x