Siemens LMV51.100C2 - User Manual

Based on the following
software versions:
LMV50... : V10.30
LMV51... : V05.20
LMV51.3… : V05.20
LMV52.2.. : V05.20
LMV52.4... : V10.30
Int. LR module: V02.10
Int. VSD module: V01.50
AZL52...: V05.10
PLL52...: V01.50
CC1P7550en
22.05.2018
Building Technologies
LMV50… / LMV51... / LMV52…
Burner management system for forced draft
burners with the main functions:
- Burner control
- Fuel-air ration control
- Boiler controller / load controller
LMV50…
with specific functions for industrial applications
LMV52...
with additional O2 trim control
Basic Documentation
The LMV5 and this Basic Documentation are intended for OEMs which integrate
the burner controls in their products!

Siemens LMV51.100C2 Specifications

General

Type	Control Unit
Series	LMV5
Model	LMV51.100C2
Frequency	50/60 Hz
Flame Safeguard	Yes
Protection Class	IP40
Application	Burner control
Supply Voltage	220...240 VAC
Outputs	relay outputs
Inputs	Flame signal, air pressure, gas pressure, temperature sensors
Ambient Temperature Range	-20 to +60 °C
Certification	CE