To Next PageTo Next Page
Need help?Do you have a question about the Siemens LMV51 Series and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Application | Burner management systems |
| Fuel | Gas, oil, dual fuel |
| Ambient Temperature | -20…+60 °C |
| Analog Inputs | 2 (0/4…20 mA) |
| Communication | Modbus RTU |
| Certification | UL |
Crucial warnings and safety precautions for handling and operating the LMV5.
Guidelines for proper physical installation and mounting of the LMV5 unit.
Essential instructions for electrical wiring and compliance with installation standards.
Details the burner control's inputs, outputs, and their functions.
Defines addresses and parameters for controlling actuators like air, fuel, and auxiliary.
Outlines the control sequence for actuators during idle, prepurge, and ignition phases.
Outlines the hierarchical structure of the AZL5 menu for navigation and settings.
General guidelines for installing the LMV5 unit, including protection and ambient temperature.
Precautions for wiring, separation of voltages, and cable types.
Details the VSD module's inputs and outputs for speed and alarm signals.
Instructions for configuring the VSD based on motor type and speed.
Introduces the O2 trim control system and its benefits for boiler efficiency.
Explains how O2 trim control adjusts air rate based on O2 setpoint.
Explains the purpose and mechanism of flue gas recirculation for NOx reduction.
