Siemens M65 - Setting

©
Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SMS.fm
51SMS
VAR Language: American; VAR issue date: 16-Februar-2004
left page (51) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)
Setting
SMS signature
C¢ M¢Msg settings
¢SMS¢SMS signature
You can enter a “signature” with up
to 16 characters. This signature will
then be attached to each SMS except
for a §Reply§ and when changes are
made to an existing SMS.
SMS profiles
C¢M¢Msg settings
¢SMS¢SMS profiles
Up to 5 SMS profiles can be set. The
transmission characteristics of an
SMS are defined in these. The pre-
setting depends on the SIM card
inserted.
Activate profile
I
Select profile.
C Activate.
Set profile
I
Select profile.
§Edit§ Open to edit the profile.
Service
centre
Enter the phone numbers for
the service centre as provided
by the service provider.
Recipient
Enter a standard recipient for
the profile.
Message
type
• Manual: Inquiry for all mes-
sages.
• Standard text: Normal SMS
message.
• Fax: Transmission via SMS.
• E-mail: Transmission via
SMS.
• New: You may need to
obtain the required code
number from your service
provider.
Validity
period
Period in which the service
centre is to try to deliver the
message:
Manual, 1 hour, 3 hours,
6 hours, 1 day, 1 week,
Maximum*
* Maximum period that the
service provider permits.
Status
report
=
Receive confirmation of suc-
cessful/failed transmission of a
message. This service may be
subject to a charge.
Direct
reply =
If activated, the reply to your
SMS message is handled via
your service centre (for infor-
mation, please contact your
service provider).
SMS via
GPRS
=
Send SMS automatically via
GPRS (p. 90).
Save aft.
send
Sent SMS messages are
saved in the Sent items list.