Siemens M65 - Page 91

©
Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Connectivity.fm
91Setup
VAR Language: American; VAR issue date: 16-Februar-2004
left page (91) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)
Data services
Basic setting and activation of the
connection profiles for data trans-
mission such as MMS, WAP.
The phone default setting varies
from service provider to service pro-
vider.
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. You will find the
current settings for the service pro-
vider on the Internet at this address:
www.siemens-mobile.com/customercare
in the "FAQ" section.
Select profile
I
Select the profile.
C
Confirm selection.
Set profile
I
Select the profile.
§Options§
Open menu.
§Edit§ Open the selection.
I
Select CSD settings, and/or
GPRS settings.
§Edit§ Make the settings as spec-
ified by your service pro-
vider.
HTTP profile
The phone default setting varies
from service provider to service pro-
vider.
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. You will find the
current settings for the service pro-
vider in the Internat at this address:
www.siemens-mobile.com/customercare
in the "FAQ" section.
I
Make the settings.
Authentication
Activate or deactivate encrypted
Internet dial-up (CSD connections
only).