Siemens MCP 398C Diagnostics Guide

Overview of Alarms 08/2005
2-944
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Program Con-
tinuation:
Switch control OFF - ON.
401502 Impermissible axis no. parameter in FC 15
Definitions: The parameterized axis does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Con-
tinuation:
Switch control OFF - ON.
401602 Impermissible axis no. parameter in FC 16
Definitions: The parameterized axis does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Con-
tinuation:
Switch control OFF - ON.
401702 Impermissible spindle IF no. parameter in FC 17
Definitions: The parameterized spindle does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Con-
tinuation:
Switch control OFF - ON.
401805 Impermissible axis no. parameter in FC 18
Definitions: The parameterized axis / spindle does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Con-
tinuation:
Switch control OFF - ON.
401901 Parameter BAGNo impermissible in FC19
Definitions: The parameterized mode group, channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Con-
tinuation:
Switch control OFF - ON.
401902 Parameter ChanNo impermissible in FC19.
Definitions: The parameterized channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Con-
tinuation:
Switch control OFF - ON.
402401 Parameter BAGNo impermissible in FC24
Definitions: The parameterized mode group, channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Con-
tinuation:
Switch control OFF - ON.

Siemens MCP 398C Specifications

General

Brand	Siemens
Model	MCP 398C
Category	Control Systems
Language	English