Creating an MM8000 Add-on distribution package
19
Building Technologies
048_DMS_DMS8000_Generic_DVR_Integration_Guide_MP4.50_A6V10331273_a_en
Fire Safety & Security Products
06.2012
4 Creating an MM8000 Add-on distribution package
4.1 Add-on installation kit
The MM8000 files for configuring a Generic DVR are distributed as an add-on kit
to be installed after the standard MM8000 software setup. Starting from an add-on
kit template, you can create the add-on installation kit with your own files and easily
install your Generic DVR configuration package on each MM8000 system that re-
quires it.
Contact the DMS8000 Customer Support to get the add-on installation kit tem-
plate for Generic DVR.
4.2 Generic DVR add-on creation
Add-on installation kit template
The installation kit template for Generic DVR includes the following folders (Fig 1):
Fig 1 Add-on installation kit
Starting from the installation kit template, the Generic DVR add-on preparation re-
quires the following steps:
1. Define Add-on name and version
Edit the text file MM8000 - Extension Product Name.txt (Fig 2) in the
MM800
0 MP4.40 - Generic DVRs (v.1.00) folder
Fig 2 Text file with installation kit name and version
The text file includes the following lines:
[GENERAL]
ADDON ID=1.00
ADDON NAME=FG DVR
VERSION MAJOR=4
VERSION MINOR=4
ADDON COMPATIBILITY VER = 3
You can customize the ADDON ID (version) and the ADDON NAME.
Be careful not to modify any other line.
2. Add your DVR(S) parameter files (XML and ICO pairs, refer to 2.2 on p.5) in the
Generic
DVR Configuration Data folder
To Next Page
Loading...
Need help?
General
