Need help?Do you have a question about the Siemens milltronics MFA 4P and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | milltronics MFA 4P |
| Category | Security System |
| Language | English |
Guidelines for transporting and storing the MFA 4p unit to maintain its condition and ensure safety.
Details user responsibilities for device modifications, repairs, and warranty limitations.
Specifies criteria for selecting a suitable mounting location, considering environmental and interference factors.
Provides instructions on correctly mounting the probe to ensure optimal performance and prevent damage.
Presents specific dimensions and hole patterns required for mounting the MSP-9 probe assembly.
Recommends using flexible conduit for probe wiring to facilitate installation and maintenance.
Diagram illustrating the component layout and terminal identification on the MFA 4p circuit board.
Instructions for connecting various MFA 4p probes (MSP, XPP) using appropriate cables and shielding.
Wiring diagram for connecting MSP-3 or MSP-9 probes with a remote mounted amplifier (RMA).
Wiring diagram for connecting MSP-12 probes with an internally mounted pre-amplifier (IMA).
Wiring diagram for connecting XPP-5 probes with an internally mounted pre-amplifier (IMA).
Specifies maximum allowable cable lengths for RMA or IMA connections based on wire gauge.
Detailed diagram showing XPP-5 probe interconnection for hazardous environments.
Guides on properly connecting the MFA 4p unit to the main power supply and grounding.
Wiring schematic for implementing the MFA 4p's automatic start delay functionality.
Step-by-step instructions for calibrating the MFA 4p for underspeed and overspeed detection.
Describes how to use a signal generator for calibrating or troubleshooting the MFA 4p.
Instructions for cleaning the MFA 4p enclosure and internal circuit boards safely.
Notes that the MFA 4p requires no specific maintenance but recommends periodic checks.
Provides a table and methods to diagnose and resolve issues with the MFA 4p and its probes.
Details power input requirements, including voltage, frequency, VA rating, and fuse type.
Outlines key performance metrics like repeatability, temperature coefficient, and setpoint ranges.
Describes the MFA 4p's output relays, including type, rating, and contact configuration.
Lists weight and enclosure material options for the MFA 4p unit.
Lists the safety and compliance certifications obtained for the MFA 4p.
Specifies environmental limits and conditions for optimal MFA 4p operation.
Dimensional drawings for MFA 4p unit enclosure variations.
Dimensional drawing for the Type 4X/NEMA 4X/IP65 polycarbonate enclosure.
Dimensional drawings for painted steel and stainless steel MFA 4p enclosures.
Presents dimensional drawings for various MFA 4p compatible probes.
Dimensional drawing and details for the MSP-3 probe.
Dimensional drawing and details for the MSP-9 probe.
Dimensional drawing and details for the MSP-12 probe.
Dimensional drawing and details for the XPP-5 probe for hazardous locations.
Explains the fundamental operating principles of the MFA 4p and its probes, including induction and speed sensing.
Illustrates optimal probe placement and considerations for installing MFA 4p in bucket elevators.
Shows a diagram for mounting the probe in a bucket elevator system.
Describes methods for using the MFA 4p to monitor rotating shafts, including paddle additions.
Depicts the application of the probe on the rotating shaft of a rotary feeder.
Illustrates probe placement for monitoring a drive sprocket on a rotary feeder.
Details probe placement and gap requirements for effective monitoring of belt conveyors.
Explains probe placement and recommended practices for screw conveyor applications.
Illustrates probe mounting relative to screw conveyor flights.
Shows probe installation near the end bearing of a screw conveyor.
Provides dimensions and mounting for a non-ferrous window application.
Contact information and online resources for obtaining technical assistance with the MFA 4p.
Lists Siemens online resources for product support and documentation.
Directs users to their Siemens personal contact for further inquiries.
Indicates where to find additional documentation for Siemens products.
Information on finding product manuals, documentation, and safety certificates.
To Next Page
