45
Siemens Operator / Room / Auxiliary devices CE1U2358en_04
Building Technologies 2014-09-26
This button is used to switch between the different operating modes.
The selection is displayed by a bar below the heating mode symbol.
Automatic operation
In automatic mode the room temperate is controlled as per the scheduler.
Characteristics of automatic mode:
l Heating mode according to the time program
l Room setpoints per the heating program "Comfort setpoint"
or "Reduced
setpoint"
l Protective functions active.
l Automatic summer / winter changeover (ECO functions)
Continuous operation or
Under continuous operation, the room temperature is maintained at a constant to
the selected operating level.
Heating to the Comfort setpoint
Heating to the Reduced set
point
Characteristics of continuous operation:
l Heating mode with no time program.
l Protective functions active.
l Automatic summer / winter changeover (ECO functions) and automatic 24-hour
heating limit inactive in the case of continuous operation with Comfort setpoint
Selecting pace heating
mode
To Next Page
Loading...
Need help?
General
