Siemens QMX3.P34-1BSC User Manual

CM2N1602en_07
2017
-05-22
Building Technologies
s
1
602
QMX3.P37 QMX3.P34 / P74 QMX3.P02 QMX3.P70 QMX3.P30 / P40
Desigo™ TRA
QMX3.P30
Q
MX3.P40
QMX3.P70
QMX3.P02
QMX3.P34
QMX3.P74
QMX3.P37
Wall-mounted sensors and room
operator units for KNX
PL-Link,
KNX S
-mode and KNX LTE-Mode
Communicative sensors, switches and room operator units with KNX (S-mode,
LTE-Mode) or KNX PL-Link (for Desigo™ Total Room Automation)
Functions (depending on type):
• Energy efficiency function ("Green Leaf
")
• Room temperature, CO
2
, and humidity measurement
• Control of light, blinds, and scenes
• PID controller for room temperature or ventilation (KNX S-mode)
• LCD Display for room temperature, operating mode, etc.
• Label for light, blinds and scenes (exchangeable, created with Word
template)
• Operation via 8 or 16 touchkeys
• Interface KNX (S-mode, LTE-Mode) and KNX PL-Link(for TRA, with plug &
play functionality)
• Powered over KNX PL-Link / KNX bus
• LEDs to indicate the switch state or the position of the device in dark rooms

Siemens QMX3.P34-1BSC Specifications

General

Brand	Siemens
Model	QMX3.P34-1BSC
Category	Accessories
Language	English

Summary

Engineering Notes and Labels

KNX PL-Link Engineering

Details engineering and commissioning for KNX PL-Link devices, including wiring and installation guides.

KNX S-mode Engineering

Covers engineering and commissioning for KNX S-mode, referencing technical basics for details.

KNX LTE-Mode Engineering

Explains engineering and commissioning for KNX LTE-Mode, referencing technical basics.

Labels for Switches

Instructions on creating and applying labels for specific switch models (QMX3.P02, P37).

Mounting and Installation Location

Location for Sensors and Room Operator Units

Guidance on optimal placement for sensors and room operator units, avoiding heat and drafts.

Commissioning Procedures (KNX PL-Link)

Prerequisites for KNX PL-Link Commissioning

Requirements before starting commissioning, including application loading on the automation station.

Manual Commissioning (KNX PL-Link)

Step-by-step guide for manual commissioning via the room automation station, covering addressing and testing.

Commissioning Procedures (KNX PL-Link without Display)

Addressing Devices without Display

Procedure for addressing KNX PL-Link devices that lack a display interface.

Connection Test for Devices without Display

How to perform a connection test for KNX PL-Link devices without a display.

Factory Reset for Devices without Display

Instructions for resetting KNX PL-Link devices without displays to factory default settings.

Commissioning and Operation (KNX)

KNX Commissioning Process

Steps for commissioning KNX devices, including addressing and factory reset.

Key Numbering and Display

Explanation of key numbering, LED indicators, and switch functions for display and operation.

Technical Data and Specifications

Supply Voltage and Power Consumption

Details on operating voltage range and power consumption for various QMX3 models.

Operating Data and Sensors

Technical specifications for temperature, humidity, and CO2 sensors, including accuracy and ranges.

Dimensions and Disposal

Product Dimensions

Detailed physical dimensions of the QMX3 series devices.

Product Disposal Guidelines

Instructions for the environmentally compliant disposal of the electronic device.