Siemens RDF301 Quick Start Guide

10 / 14
Siemens RDF301. / RDF301.50 / RDF600KN CE1N3171en
Building Technologies Semi flush-mount room thermostats with KNX communications 2012.10-04
Operational data Switching differential, adjustable
Heating mode (P30)
Cooling mode (P31)
2 K (0.5...6K)
1 K (0.5...6K)
Setpoint setting and range
Comfort (P08)
Economy (P11-P12)
Protection (P65-P66)
21°C (5...40 °C)
15°C/30°C (OFF, 5...40 °C)
8°C/OFF (OFF, 5...40 °C)
Multifunctional input X1/X2
Input X1 default value (P38)
Input X2 default value (P40)
Selectable 0...8
3 (Operating mode
switchover)
1 (External temperature
sensor)
Built-in room temperature sensor
Measuring range
Accuracy at 25 °C
Temperature calibration range
0…49 °C
< ± 0.5 K
± 3.0 K
Settings and display resolution
Setpoints
Current temperature value displayed
0.5 °C
0.5 °C
Environmental conditions Operation
Climatic conditions
Temperature
Humidity
As per IEC 721-3-3
Class 3K5
0...50 °C
<95 % r.h.
Transport
Climatic conditions
Temperature
Humidity
Mechanical conditions
As per IEC 721-3-2
Class 2K3
25...60 °C
<95 % r.h.
Class 2M2
Storage
Climatic conditions
Temperature
Humidity
As per IEC 721-3-1
Class 1K3
25...60 °C
<95 % r.h.
Standards and directives
conformity
EMC directive
Low-voltage directive
2004/108/EC
2006/95/EC
C-tick conformity to EMC emission standard
AS/NZS 61000.6.3: 2007
Reduction of hazardous substances 2002/95/EC
Product standards
Automatic electrical controls for household and
similar use
Special requirements for temperature-dependent
controls
Electronic control type
Home and Building Electronic Systems
EN 60730–1
EN 60730–2-9
2.B (micro-disconnection on
operation)
EN 50090-2-2
Electromagnetic compatibility
Emissions (residential)
Immunity (industrial and residential)
IEC/EN 61000-6-3
IEC/EN 61000-6-2
Safety class II as per EN 60730
Pollution class Normal
Degree of protection of housing IP 30 as per EN 60529

Siemens RDF301 Specifications

General

Brand	Siemens
Model	RDF301
Category	Thermostat
Language	English