To Next PageTo Next Page
Need help?Do you have a question about the Siemens RDJ10RF/SET and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Protection Class | IP30 |
| Frequency | 868 MHz |
| Battery Life | Approx. 2 years |
| Mounting | Wall |
| Switching Differential | 0.5°C |
| Temperature Range | 5°C to 30°C |
| Setpoint Range | 5°C to 30°C |
Controller logic diagram for room temperature control and heating output.
Confirms RDJ10RF provides room temperature control only.
Details Automatic, Comfort, Energy Saving, and Frost Protection modes.
Explains screen content and heating output indicator.
Battery exchange data retention and time reset.
Lists compatible actuators/valves with product numbers.
Details the four main parts of the RDJ10RF unit.
Describes the receiver's plastic housing, LEDs, and buttons.
Details buttons on the rear of the controller.
Table detailing RF LED states and their meanings.
Table detailing Relay LED states and their meanings.
Guidance on controller placement and installation.
Information on maintenance and battery replacement.
Steps to reset the controller and receiver.
Instructions for electronic device and battery disposal.
Details power supply, operational, environmental, and general specs.
Details unit data, outputs, electrical, environmental, and color specs.
Wiring diagram for connecting the receiver to heating/cooling systems.
Illustrates system configurations for boilers, burners, and pumps.
Provides overall dimensions for the room temperature controller.
Shows dimensions for the controller mounting plate.
Illustrates the angle and dimensions of the fold-out stand.
Provides overall dimensions for the receiver and its mounting plate.
