15
Building Technologies / HVAC Products CE1B3123x2-en 74 319 0503 0 a 06.04.2006
Example: Operating room temperature control
Your RMS705 can also be used as a controller for a
number of physical variables. Operation of room
temperature control is described here as an example.
The RMS705 maintains the 2 adjusted setpoints (heating
and cooling). The control can be on or off, depending on
the selected operating mode On, Off, or Auto
(
page 11).
Setpoints low and high according to the table below can
be adjusted. The default factory settings represent the
recommended setpoints.
You can change the setpoints to suit your needs (refer to
the menu path below).
Icon Operating
mode
Impact on the building Setpoint low (heating)* Setpoint high (cooling)*
I On The setpoint will be maintained, thus
ensuring comfortable room conditions
21 °C 24 °C
0 Off Plant not in operation --- ---
* Guide values (corresponding to the default factory settings)
Path: Welcome > Main menu > Controller 1… > Setpoint low
Path: Welcome > Main menu > Controller 1… > Setpoint high
To Next Page
Loading...
