Connecting SCALANCE M-800 to WAN
1.3 Connecting M826 with SHDSL
SCALANCE M-800 Getting Started
48 Getting Started, 06/2015, C79000-G8976-C337-04
Required devices/components
Use the following components for setup:
● Connection to SHDSL
– 3 x M826 (additional option: a suitably installed standard rail with fittings)
– 3 x 24 V power supply with cable connector and terminal block plug
– 2 x 2-wire cable with terminal block plugs
● 3 x PC each connected to an M826.
1. Setting up SCALANCE M826 and network (Page 49).
To Next Page
Loading...
Need help?
General
