Description of the device
4.6 Reset button
SCALANCE W778-1 / W738-1
Operating Instructions, 03/2022, C79000-G8976-C450-07
31
Note
Primary user (radar) on all enabled channels (only when DFS is enabled)
If the device detects competing radar
signals on all enabled channels of the WLAN
F LED is lit and R1 flash. No data traffic is then possible for the next 30
minutes. After this time, the device runs the scan again and checks whether a primary
user still exists. If no primary u
ser is detected, data traffic is possible again.
The wait time of 30 minutes is necessary due to legal requirements and cannot be
shortened even by restarting the device.
4.6 Reset button
Position
NOTICE
Loss of the degree of protection
If the cover is not mounted correctly, the device is not water and dust proof.
To Next Page
Loading...
Need help?
General
