Siemens SCALANCE XM-400 - Page 26

3 Engineering VRRP
VRRP
Entry-ID: 109798556, V1.0, 09/2021
26
© Siemens AG
2021 All rights reserved
6. Open the "Port Assignment" tab.
7. Set "Port P1.3" to "U" (untagged) for VLAN 10.
8. Set "Port P1.4" to "U" (untagged) for VLAN 20. The packets will be sent without
a tag. These settings apply only to outgoing telegrams.
9. Click the "Set Values" button.
10. To correctly configure the VLANs, the tagging for incoming telegrams that
reach the switch without a tag must also be set. Open the "Port Based VLAN"
tab.
11. Assign VLAN 10 to "Port P1.3".
12. Assign VLAN 20 to "Port P1.4".
13. Click the "Set Values" button.
10
11
13
12
Result
You have created the two VLANs 10 and 20 for incoming and outgoing telegrams.