To Next PageTo Next Page
Need help?Do you have a question about the Siemens SCALANCE XC-200 and is the answer not in the manual?
General| Port Types | RJ45, SFP |
|---|---|
| Operating Temperature | -40 °C to +70 °C |
| Protection Class | IP30 |
| Mounting | DIN Rail |
| Managed | Yes |
| Layer | Layer 2 |
| Device Type | Industrial Ethernet Switch |
| Power Supply | 24 V DC |
| Approvals | cUL, ATEX, IECEx |
| Product Family | SCALANCE XC-200 |
Covers purpose, validity, designations, additional documentation, manuals, glossary, and catalogs.
Details on unpacking, checking for damage, and essential security information for devices.
Lists registered and other trademarks associated with Siemens AG products.
Covers general safety, explosion protection, and specific safety for Hazardous Locations (HazLoc).
Provides comprehensive recommendations for securing the device and network infrastructure.
Details on securing interfaces, available protocols, authentication, and encryption.
Details product overview, article numbers, type designation, included components, and accessories like C-PLUG.
Provides detailed views and identification of components for various SCALANCE XC-200 models.
Explains the SELECT/SET button functionality, display modes, and all LED status indicators.
Covers C-PLUG configuration management, operation, replacement, and NFC functionality.
Covers safety, hazardous areas, ATEX/IECEx compliance, and environmental considerations for installation.
Details installation types (DIN rail, S7 rail, wall), clearance, location, and specific mounting steps.
Instructions for adjusting the securing bar position and general notes for SFP transceivers.
Covers safety during connection, hazardous areas, HazLoc, ATEX/IECEx, and LAN connection requirements.
Details wiring rules, cable specifications, power supply connection, and functional grounding.
Explains the function of the signaling contact and how to use the serial interface for configuration.
Procedure for updating device firmware using TFTP without WBM or CLI.
Instructions on how to reset the device to its factory default configuration.
Detailed technical specifications for SCALANCE XC206-2, XC206-2SFP, XC208, XC216, and XC224 models.
Covers mechanical stability, permitted cable lengths, and switching properties of the devices.
Provides front views, side views, depth measurements, and drilling templates for wall mounting.
Information on general approvals, finding them online, EC conformity, and relevant directives.
Details on ATEX, IECEx explosion protection, EMC, RoHS, and FM certifications.
Information on cULus, RCM, FDA, and IEC compliance marks and standards.
