Need help?Do you have a question about the Siemens SIMATIC NET SCALANCE XC208 and is the answer not in the manual?
General| Switching Capacity | 1.6 Gbps |
|---|---|
| Power Supply | 24 V DC |
| Mounting Type | DIN Rail |
| Protection Class | IP30 |
| Device Type | Industrial Ethernet Switch |
| Ports | 8 x 10/100 Mbps RJ45 |
| Operating Temperature | -40 to +70 °C |
| Protocols | HTTP, HTTPS, SNMP |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
General safety notices and those related to explosion protection.
Covers information security, physical access, passwords, certificates, and protocols.
Covers general, hazardous area, ATEX, IECEx, FM, and sunlight safety.
Details DIN rail, S7-300/S7-1500 rail, and wall mounting procedures.
Safety precautions for connecting the device, including hazardous areas.
Details wiring rules, power supply connection, and warnings.
Explains signaling contacts, serial interface, and functional grounding.
Procedure for updating device firmware using TFTP.
Steps to restore device to factory default settings.
To Next Page