Need help?Do you have a question about the Siemens SIMATIC NET SCALANCE XB-208 and is the answer not in the manual?
General| Product Type | Industrial Ethernet Switch |
|---|---|
| Ports | 8 |
| Port Type | 10/100 Mbps RJ45 |
| Power Supply | 24 V DC |
| Temperature Range | -40 to +70 °C |
| Protection Class | IP30 |
| Mounting Type | DIN Rail |
| Managed | No |
| Redundancy | No |
| Dimensions (W x H x D) | 125 mm |
General warnings and safety notices relating to the device's working life.
Safety notices for use in hazardous areas, including explosion and location specifics.
Specific safety notices for ATEX and IECEx environments.
General recommendations for network security, physical access, and software.
Guidelines for password management and securing certificates and keys.
Information on secure protocols, services, and securing device interfaces.
Details product variants, article numbers, and factory settings.
Illustrations of device components: XB208, XB205-3, XB213-3, RESET button, LEDs.
General and hazardous area safety notices for installing the device.
Safety notices for connecting the device, including hazardous areas and ATEX/IECEx.
Procedure for downloading new firmware using TFTP without WBM or CLI.
Instructions to reset device parameters to factory defaults via button or configuration.
To Next Page