Need help?Do you have a question about the Siemens SIMATIC NET SCALANCE XB-216 and is the answer not in the manual?
General| Device Type | Managed Industrial Ethernet Switch |
|---|---|
| Operating Temperature | -40°C to +70°C |
| Weight | 0.9 kg |
| Mounting Type | DIN Rail |
| Protection Class | IP20 |
| Switching Capacity | 3.2 Gbps |
| Ports | 16 x 10/100 Mbps RJ45 |
| Power Supply | 24 V DC |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.1p, IEEE 802.1Q |
Covers general safety notices for protection against explosion and use in hazardous locations.
Covers general security practices, physical access restrictions, and software security functions.
Details password management, certificate usage, and key security for device access.
Discusses secure protocols, disabling non-secure ones, and securing network interfaces.
Covers general safety, hazardous areas, ATEX, and IECEx requirements for installation.
Covers essential safety notices for connecting the device, including hazardous areas and ATEX/IECEx.
Specifies voltage, current, fusing, and connection information for the device's power supply.
Step-by-step guide for updating device firmware using TFTP without WBM or CLI.
Instructions on resetting the device to factory defaults via the RESET button or configuration.
To Next Page