To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC NET SCALANCE XR-300 and is the answer not in the manual?
Explains the objective of the operating instructions for the SCALANCE XR-300.
Defines the specific SCALANCE XR322-12, XR326-8, and XR326-8EEC devices covered.
Describes conventions used for clear and efficient information presentation.
Lists other relevant Siemens documents and resources available online.
Provides information on Siemens Industry Online Support and services.
Explains specialist terms used throughout the SIMATIC NET documentation.
Details security functions for secure operation of plants, systems, machines, and networks.
Instructs on handling device faults and the prohibition of on-site repairs.
Guides on safely shutting down the device to prevent unauthorized data access.
Covers product compliance with WEEE directive and disposal guidelines.
Lists registered trademarks of Siemens AG, including SCALANCE and SINEC.
Provides precautions for handling ESD-sensitive components to avoid damage.
General advice to prevent unauthorized access to the device and/or network.
Lists supported protocols and services with their configurations and security features.
Lists article numbers and product properties for different SCALANCE XR-300 models.
Illustrates the front and rear views of device components for various models.
Explains the function and meaning of the device's various LEDs.
Describes the position and function of the device's SELECT/SET button.
Details the function of the CLP for data backup, exchange, and licensing.
Lists critical safety notices for device installation and handling.
Outlines approved installation methods, including rack and four-point mounting.
Provides instructions and warnings for installing the device in a 19-inch rack.
Explains requirements and procedures for four-point mounting, especially for ships.
Details the process for handling SFP/SFP+ transceivers, including safety notes.
Provides safety warnings regarding improper device disassembly and explosion risk.
Lists essential safety notices for connecting devices to power and networks.
Specifies cable categories, wire preparation, and connection rules.
Covers safety and connection details for 24V AC/DC power supplies.
Details connection methods for high voltage AC/DC power supplies.
Explains functional and protective grounding procedures for device safety.
Covers electrical, optical, and port-related aspects of Industrial Ethernet.
Explains the function, connection, and signaling faults of the contact.
Details the USB console interface for device access and driver requirements.
Guides on correctly inserting and removing the Configuration License PLUG.
Explains how to reset the device to factory defaults during the startup phase.
Explains how to reset the device to factory defaults during normal operation.
Provides steps to update device firmware using the TFTP protocol.
Lists technical specifications for XR326-8 and XR326-8EEC models.
Lists technical specifications for the SCALANCE XR322-12 model.
Details shock and vibration resistance requirements for device operation.
Lists permitted cable lengths for various types of Ethernet cables.
Describes frame handling, latency, and speed characteristics of the switch.
Provides overall dimensional drawings for the SCALANCE XR-300 device.
Shows design drawings for special mounting brackets for ship installations.
General