Siemens SIMATIC NET SCALANCE XC206-2 User Manual

SIMATIC NET
Industrial Ethernet switches
SCALANCE XC-200
Operating Instructions
12/2017
C79000-G8976-C442-03
Introduction
1
Safety notices
2
Description of the device
3
Mounting
4
Connecting up
5
Maintenance and
troubleshooting
6
Technical specifications
7
Dimension drawings
8
Certifications and approvals
9

Siemens SIMATIC NET SCALANCE XC206-2 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE XC206-2
Category	Switch
Language	English

Summary

Safety notices

Read the safety notices

Safety notices on use in hazardous areas

Specific safety requirements for operating the device in hazardous locations.

Recommendations on network security

Essential security guidelines for device and network protection, including passwords and protocols.

Mounting

4.1 Safety notices for installation

Critical safety warnings and precautions to observe during device installation.

Connecting up

5.1 Safety when connecting up

Essential safety instructions and warnings for connecting the device.

5.2 Wiring rules

5.3 Power supply

Details on connecting the power supply, voltage requirements, and overvoltage protection.

5.6 Functional ground

Maintenance and troubleshooting

6.1 Downloading new firmware using TFTP without WBM and CLI

Procedure for updating device firmware via TFTP.

6.2 Restoring the factory settings

Steps to reset the device to its original factory default configuration.

Technical specifications

7.1 Technical specifications SCALANCE XC206-2 (ST/BFOC)

Detailed technical data for the SCALANCE XC206-2 (ST/BFOC) model.

7.2 Technical specifications SCALANCE XC206-2 (SC)

Detailed technical data for the SCALANCE XC206-2 (SC) model.

7.3 Technical specifications SCALANCE XC206-2SFP

Detailed technical data for the SCALANCE XC206-2SFP model.

7.4 Technical specifications of the SCALANCE XC208

Detailed technical data for the SCALANCE XC208 model.

7.5 Technical specifications of the SCALANCE XC216

Detailed technical data for the SCALANCE XC216 model.

7.6 Technical specifications of the SCALANCE XC224

7.9 Switching properties

Certifications and approvals

EC declaration of conformity

ATEX and IECEx Certifications

Details ATEX and IECEx explosion protection directives and classifications.

EMC and RoHS Compliance

Regional Approvals (FM, cULus, RCM)