Technical specifications
Signaling contact
1)
Quantity 1
Design Terminal block, 2 terminals
Permitted voltage range 24 VDC
Load capability max. 100 mA
Permitted ambient conditions
Ambient temperature
3)
During operation up to 2000 m -40 °C to +70 °C
During storage -40 ℃ to +85 ℃
During transportation -40 ℃ to +85 ℃
Relative humidity During operation at 25 ℃ ≤ 95 % no condensation
Housing, dimensions and weight
Design compact
Housing material Basic housing Die cast aluminum, powder coated
Front cover Polycarbonate (PC-GF10)
Degree of protection IP20
Dimensions (W x H x D) 60 x 145 x 125 mm
Weight 520 g
Installation options
● Wall mounting
● Installation on a DIN rail
● Mounting on an S7-300 standard rail
● Mounting on an S7-1500 standard rail
Mean time between failure (MTBF)
MTBF (EN/IEC 61709; 40 °C) > 47 years
1)
Note the wiring rules (Page 51).
2)
Detected with the SFP992-1ELH. You will find the precise values in the operating instructions
of the pluggable transceivers, see the section "Introduction" Additional documentation
(Page 5).
3)
Depending on which pluggable transceiver you use, the maximum ambient temperature can
change, see section "Accessories", Pluggable transceivers SFP (Page 18)".
7.4 Technical specifications of the SCALANCE XC208
The following technical specifications apply to the SCALANCE XC208.
Technical specifications
Attachment to Industrial Ethernet
Electrical connectors Quantity 8
Connector RJ-45 jack
Properties Half/full duplex, MDI‑X pinning
Transmission speed 10 / 100 Mbps
Diagnostics interface
Technical specifications
7.4 Technical specifications of the SCALANCE XC208
SCALANCE XC-200
Operating Instructions, 12/2017, C79000-G8976-C442-03 63
To Next Page
Loading...
Need help?
General