To Next PageTo Next Page
Need help?Do you have a question about the Siemens SCALANCE XM-400 and is the answer not in the manual?
General| Operating Temperature | -40°C to +70°C |
|---|---|
| Managed | Yes |
| Protection Class | IP30 |
| Product Type | Industrial Ethernet Switch |
| VLAN Support | Yes |
| Redundancy | Yes |
| Redundancy Protocols | STP/RSTP/MSTP, MRP |
| Power Supply | 24 V DC (redundant possible) |
| Mounting Type | DIN rail or wall mounting |
| Protocols Supported | SNMP, DHCP |
| Security Features | Access control |
| Certifications | CE, FCC, UL, cUL, ATEX, IECEx |
| Dimensions | Varies by model (e.g., 35 x 125 x 117 mm for 8-port) |
| Weight | Varies depending on configuration |
| Port Types | 10/100/1000 Mbps Ethernet (RJ45), 1000 Mbps Ethernet (SFP) |
Explains the scope and objective of the operating instructions.
Points to manuals for device configuration and further system documentation.
Instructions for unpacking and verifying the contents of the package.
Safety guidelines for hazardous locations and explosion protection.
Warnings and precautions for explosion hazard environments.
Specific safety requirements when using the device in HazLoc conditions.
Details on basic devices, port extenders, accessories, and spare parts.
Explains SELECT/SET button, LED display, and C-PLUG/KEY-PLUG functionality.
Details on combo ports, Power over Ethernet (PoE), and other device functions.
Critical safety instructions before and during device installation.
Options for mounting the device on DIN rails or S7 standard rails.
Procedures for connecting and securing extenders to the basic device.
Essential safety precautions for connecting the device to power and network.
Details on power supply, serial, out-of-band, NFC, and grounding connections.
Procedure to update device firmware using TFTP without WBM or CLI.
Steps to reset the device to its original factory configuration.
Detailed technical data for the SCALANCE XM408-4C model.
Detailed technical data for the SCALANCE XM408-8C model.
Information on the device's switching techniques, latency, and frame delay.
Physical dimensions of the SCALANCE XM-400 basic device.
Physical dimensions of the SCALANCE port extenders.
Compliance with electromagnetic compatibility standards and directives.
Information on FDA and IEC compliance requirements and marks.
ATEX classification and standards for explosion protection.
