Need help?Do you have a question about the Siemens SCALANCE XB116 and is the answer not in the manual?
General| Product Type | Industrial Ethernet Switch |
|---|---|
| Number of Ports | 16 |
| Protection Class | IP30 |
| Mounting Type | DIN rail mounting |
| VLAN Support | Yes |
| Quality of Service (QoS) | Yes |
| IP Rating | IP30 |
| Port Type | 10/100 Mbps RJ45 |
| Power Supply | 24 V DC |
| Operating Temperature | -40°C to +70°C |
| Switching Capacity | 3.2 Gbps |
| Redundancy Functions | MRP |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
General safety instructions to be observed for the entire working life of the device.
Explains explosion hazards and necessary precautions, including ATEX/FM use.
Explanation of the port LEDs and power LEDs indicating device status.
Crucial safety information to be followed during the installation process.
Specific safety guidelines for installing the device in areas with explosion hazards.
Step-by-step instructions for mounting the device onto a standard 35 mm DIN rail.
Essential safety precautions to observe before and during device connection.
Information and warnings regarding the correct power supply requirements for the device.
Instructions for implementing functional grounding to ensure data transmission immunity.
Details on ATEX classification and standards for use in potentially explosive atmospheres.
Information on IECEx certification and standards for explosion protection.
To Next Page