To Next PageTo Next Page
Need help?Do you have a question about the Siemens SCALANCE XB-200 and is the answer not in the manual?
General| Protection Class | IP30 |
|---|---|
| VLAN Support | Yes |
| Weight | Varies by model |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1w, IEEE 802.1s |
| Product Type | Ethernet Switch |
| Port Types | RJ45, SFP |
| Power Supply | 24 V DC |
| Operating Temperature | -40°C to +70°C |
| Mounting Type | DIN rail mounting |
| Protocol Support | HTTP, HTTPS, SNMP |
| Redundancy Protocols | RSTP, MSTP |
| Number of Ports | 8 or 16 |
| Dimensions | Various depending on model |
Information on industrial security functions and recommendations for product updates.
Safety notices related to explosion protection in hazardous areas.
Describes the location, operation, and factory reset function of the RESET button.
Safety notices to observe when installing the device, including hazardous areas.
Step-by-step instructions for mounting the device on a DIN rail and its removal.
Safety notices for connecting the device, including SELV/LPS and optical connections.
Safety notices for HazLoc conditions, specifically regarding disconnecting live circuits.
Safety notices for ATEX/IECEx use, focusing on transient voltage surges.
Safety notice for LAN connections, emphasizing isolation and avoiding telephone/WAN connections.
Notes and information regarding the device's power supply, including voltage and overvoltage protection.
Information on accessing the device CLI via the serial RJ-11 jack and its pin assignment.
Explains the purpose and connection of the functional ground for EMC and interference-free operation.
Step-by-step guide to updating device firmware using TFTP without WBM or CLI.
Instructions for resetting device parameters to factory defaults using the RESET button or PST.
Detailed technical specifications for the SCALANCE XB208 model.
Detailed technical specifications for the SCALANCE XB205-3 (SC) model.
Details ATEX classification and standards met by SIMATIC NET products.
Lists standards met by the product for Factory Mutual Approval.
Details cULus approvals for Information Technology Equipment, including UL and CSA standards.
Details cULus approvals for Hazardous Locations, including standards and approved use.
