Connecting up
4.8 Functional ground
SCALANCE XM-400
Operating Instructions, 05/2014, C79000-G8976-C306-03
55
Functional ground
Position
The functional ground is established via a grounding screw.
The connector for the grounding cable is in the center of the underside of the device.
Figure 4-6 Position of the grounding bolt on the SCALANCE XM-400
Connecting up functional ground
Grounding terminal with cable
Bolt with spring washer and washer
Follow the steps below to connect the functional ground:
1. Put the grounding terminal
①, and the bolt ② together as shown in the drawing.
2. Screw in the bolt
② with a maximum tightening torque of 1.5 Nm.
To Next Page
Loading...
