Siemens SCALANCE XM-400 User Manual

Installation
3.7 General notes for SFP transceivers
SCALANCE XM-400
44 Operating Instructions, 05/2014, C79000-G8976-C306-03
3.7
General notes for SFP transceivers
WARNING
Use only approved SFP transceivers
If you use SFP transceivers that have not been approved by Siemens AG, there is no
guarantee that the device will function according to its specifications.
If you use unapproved SFP transceivers, this can lead to the following problems:
• Damage to the device
• Loss of the approvals
• Violation of EMC regulations
• Use only approved SFP transceivers.
Note
Plugging and pulling during operation
The transceivers can be plugged and pulled during operation.
Documentation for SFP transceivers
You will find detailed information on installation in the compact operating instructions "SFP
transceivers SFP/SFP+".
You will find the compact operating instructions "SFP transceivers SFP/SFP+" as follows:
● On the data medium that ships with some products, under the file name BAK_SFP-
SFP_76.pdf":
– Product CD / product DVD
– SIMATIC NET Manual Collection
● On the Internet under the following entry ID:
59604783 (http://support.automation.siemens.com/WW/view/en/59604783
)

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English